[PATCH 21/38] arm64: dts: mediatek: mt6795-sony-xperia-m5: Add pinctrl for mmc1/mmc2

[Matthias Brugger]

On 24/07/2025 10:38, AngeloGioacchino Del Regno wrote:
> Add pinctrl nodes for the MicroSD slot on mmc1 and SDIO Controller
> on mmc2 and assign those to the respective controller nodes.
> This makes sure that all of the pins are muxed in the right state
> and with the right pullup/down(s) before trying to use the mmc
> controllers.
> 
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>

Applied, thanks

> ---
>   .../dts/mediatek/mt6795-sony-xperia-m5.dts    | 38 +++++++++++++++++++
>   1 file changed, 38 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts b/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
> index 03cc48321a3f..fccb948cfa45 100644
> --- a/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
> @@ -227,6 +227,8 @@ &mmc0 {
>   
>   &mmc1 {
>   	/* MicroSD card slot */
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&mmc1_pins_default>;
>   	vmmc-supply = <&mt6331_vmc_reg>;
>   	vqmmc-supply = <&mt6331_vmch_reg>;
>   	status = "okay";
> @@ -234,6 +236,8 @@ &mmc1 {
>   
>   &mmc2 {
>   	/* SDIO WiFi on MMC2 */
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&mmc2_pins_default>;
>   	vmmc-supply = <&mt6331_vmc_reg>;
>   	vqmmc-supply = <&mt6331_vmch_reg>;
>   	status = "okay";
> @@ -311,6 +315,40 @@ pins-ds {
>   		};
>   	};
>   
> +	mmc1_pins_default: microsd-pins {
> +		pins-cmd-dat {
> +			pinmux = <PINMUX_GPIO171__FUNC_MSDC1_DAT0>,
> +				 <PINMUX_GPIO172__FUNC_MSDC1_DAT1>,
> +				 <PINMUX_GPIO173__FUNC_MSDC1_DAT2>,
> +				 <PINMUX_GPIO174__FUNC_MSDC1_DAT3>,
> +				 <PINMUX_GPIO170__FUNC_MSDC1_CMD>;
> +			input-enable;
> +			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
> +		};
> +
> +		pins-clk {
> +			pinmux = <PINMUX_GPIO175__FUNC_MSDC1_CLK>;
> +			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
> +		};
> +	};
> +
> +	mmc2_pins_default: sdio-pins {
> +		pins-cmd-dat {
> +			pinmux = <PINMUX_GPIO100__FUNC_MSDC2_DAT0>,
> +				 <PINMUX_GPIO101__FUNC_MSDC2_DAT1>,
> +				 <PINMUX_GPIO102__FUNC_MSDC2_DAT2>,
> +				 <PINMUX_GPIO103__FUNC_MSDC2_DAT3>,
> +				 <PINMUX_GPIO105__FUNC_MSDC2_CMD>;
> +			input-enable;
> +			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
> +		};
> +
> +		pins-clk {
> +			pinmux = <PINMUX_GPIO104__FUNC_MSDC2_CLK>;
> +			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
> +		};
> +	};
> +
>   	nfc_pins: nfc-pins {
>   		pins-irq {
>   			pinmux = <PINMUX_GPIO3__FUNC_GPIO3>;