[PATCH v4 04/13] phy: qcom: qmp-usbc: Add QCS615 DP PHY configuration and init data

[Xiangxu Yin]

On 9/12/2025 4:46 PM, Konrad Dybcio wrote:
> On 9/12/25 4:15 AM, Xiangxu Yin wrote:
>> On 9/12/2025 9:24 AM, Dmitry Baryshkov wrote:
>>> On Thu, Sep 11, 2025 at 10:55:01PM +0800, Xiangxu Yin wrote:
>>>> Introduce QCS615 hardware-specific configuration for DP PHY mode,
>>>> including register offsets, initialization tables, voltage swing
>>>> and pre-emphasis settings.
>>>>
>>>> Add qcs615-qmp-usb3-dp-phy compatible string to associate QCS615
>>>> platform with its USB/DP switchable PHY configuration.
>>> This should be the last patch in the series: once you add the compatible
>>> string, it is expected that it works.
>>>
>>> The patch LGTM.
>>
>> In v3[12/14], the compatible string was placed in the last, and you remind me
>> will trigger unused warnings for the earlier-defined qcs615_usb3dp_phy_cfg.
>> So I merged them in v4. 
> The intention is that you can do all the preparing first (which doesn't need
> to include an assignment to e.g. DP tables, since the code operates on a
> pointer if it's non-null), and you can push all the platform additions at the
> end (both tables and compatible in one patch)
>
> Konrad


Ok, then merging 04 and 07 with the compatible in the last patch
looks appropriate, will update in next patch.


>> If move this patch to the end, patch v4[07/13] will hit unused warnings due to
>> missing references. Should I squash patches 04 & 07 and move them to the end?
>> I'm concerned the resulting patch might be too large.
>>
>>
>>>> Signed-off-by: Xiangxu Yin <xiangxu.yin at oss.qualcomm.com>
>>>> ---
>>>>  drivers/phy/qualcomm/phy-qcom-qmp-usbc.c | 141 +++++++++++++++++++++++++++++++
>>>>  1 file changed, 141 insertions(+)
>>>>