[PATCH v2 04/11] phy: renesas: Add Renesas RZ/G3E USB3.0 PHY driver

[Philipp Zabel]

On Di, 2025-09-09 at 19:07 +0100, Biju wrote:
> From: Biju Das <biju.das.jz at bp.renesas.com>
> 
> Add Renesas RZ/G3E USB3.0 PHY driver. This module is connected
> between USB3 Host and PHY module. The main functions of this
> module are:
>  1) Reset control
>  2) Control of PHY input pins
>  3) Monitoring of PHY output pins
> 
> Signed-off-by: Biju Das <biju.das.jz at bp.renesas.com>
> ---
> v1->v2:
>  * Replaced magic numbers with macros.
> ---
>  drivers/phy/renesas/Kconfig          |   7 +
>  drivers/phy/renesas/Makefile         |   1 +
>  drivers/phy/renesas/phy-rzg3e-usb3.c | 271 +++++++++++++++++++++++++++
>  3 files changed, 279 insertions(+)
>  create mode 100644 drivers/phy/renesas/phy-rzg3e-usb3.c
> 
[...]
> diff --git a/drivers/phy/renesas/phy-rzg3e-usb3.c b/drivers/phy/renesas/phy-rzg3e-usb3.c
> new file mode 100644
> index 000000000000..6463519b2c22
> --- /dev/null
> +++ b/drivers/phy/renesas/phy-rzg3e-usb3.c
> @@ -0,0 +1,271 @@
[...]
> +static int rzg3e_phy_usb3_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct phy_provider *provider;
> +	struct rz_usb3 *r;
> +	struct phy *phy;
> +	int ret;
> +
> +	r = devm_kzalloc(dev, sizeof(*r), GFP_KERNEL);
> +	if (!r)
> +		return -ENOMEM;
> +
> +	r->base = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(r->base))
> +		return PTR_ERR(r->base);
> +
> +	r->rstc = devm_reset_control_get_shared(dev, NULL);
> +	if (IS_ERR(r->rstc))
> +		return dev_err_probe(dev, PTR_ERR(r->rstc), "failed to get reset\n");
> +
> +	ret = reset_control_deassert(r->rstc);
> +	if (ret)
> +		return ret;

It looks like you should be able to use
devm_reset_control_get_shared_deasserted() and let devres handle reset
control assertion on error and driver removal.

As is, the driver is missing a reset_control_assert() in the probe
error paths.


regards
Philipp