[PATCH v2 2/3] phy: qcom-qmp: qserdes-com: Add v8 DP-specific qserdes register offsets

[Konrad Dybcio]

On 9/9/25 1:19 PM, Dmitry Baryshkov wrote:
> On Tue, Sep 09, 2025 at 01:07:27PM +0300, Abel Vesa wrote:
>> Starting with Glymur, the PCIe and DP PHYs qserdes register offsets differ
>> for the same version number. So in order to be able to differentiate
>> between them, add these ones with DP prefix.
>>
>> Signed-off-by: Abel Vesa <abel.vesa at linaro.org>
>> ---
>>  .../phy/qualcomm/phy-qcom-qmp-dp-qserdes-com-v8.h  | 52 ++++++++++++++++++++++
>>  1 file changed, 52 insertions(+)
>>
>> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-dp-qserdes-com-v8.h b/drivers/phy/qualcomm/phy-qcom-qmp-dp-qserdes-com-v8.h
>> new file mode 100644
>> index 0000000000000000000000000000000000000000..2bef1eecdc56a75e954ebdbcd168ab7306be1302
>> --- /dev/null
>> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-dp-qserdes-com-v8.h
>> @@ -0,0 +1,52 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/*
>> + * Copyright (C) 2025 Linaro Ltd.
>> + */
>> +
>> +#ifndef QCOM_PHY_QMP_DP_QSERDES_COM_V8_H_
>> +#define QCOM_PHY_QMP_DP_QSERDES_COM_V8_H_
>> +
>> +/* Only for DP QMP V8 PHY - QSERDES COM registers */
>> +#define DP_QSERDES_V8_COM_HSCLK_SEL_1			0x03c
>> +#define DP_QSERDES_V8_COM_BIN_VCOCAL_CMP_CODE1_MODE0	0x058
>> +#define DP_QSERDES_V8_COM_BIN_VCOCAL_CMP_CODE2_MODE0	0x05c
>> +#define DP_QSERDES_V8_COM_SSC_STEP_SIZE1_MODE0		0x060
>> +#define DP_QSERDES_V8_COM_SSC_STEP_SIZE2_MODE0		0x064
>> +#define DP_QSERDES_V8_COM_CP_CTRL_MODE0			0x070
>> +#define DP_QSERDES_V8_COM_PLL_RCTRL_MODE0		0x074
>> +#define DP_QSERDES_V8_COM_PLL_CCTRL_MODE0		0x078
>> +#define DP_QSERDES_V8_COM_CORECLK_DIV_MODE0		0x07c
>> +#define DP_QSERDES_V8_COM_LOCK_CMP1_MODE0		0x080
>> +#define DP_QSERDES_V8_COM_LOCK_CMP2_MODE0		0x084
>> +#define DP_QSERDES_V8_COM_DEC_START_MODE0		0x088
>> +#define DP_QSERDES_V8_COM_DIV_FRAC_START1_MODE0		0x090
>> +#define DP_QSERDES_V8_COM_DIV_FRAC_START2_MODE0		0x094
>> +#define DP_QSERDES_V8_COM_DIV_FRAC_START3_MODE0		0x098
>> +#define DP_QSERDES_V8_COM_INTEGLOOP_GAIN0_MODE0		0x0a0
>> +#define DP_QSERDES_V8_COM_VCO_TUNE1_MODE0		0x0a8
>> +#define DP_QSERDES_V8_COM_INTEGLOOP_GAIN1_MODE0		0x0a4
>> +#define DP_QSERDES_V8_COM_VCO_TUNE2_MODE0		0x0ac
>> +#define DP_QSERDES_V8_COM_BG_TIMER			0x0bc
>> +#define DP_QSERDES_V8_COM_SSC_EN_CENTER			0x0c0
>> +#define DP_QSERDES_V8_COM_SSC_ADJ_PER1			0x0c4
>> +#define DP_QSERDES_V8_COM_SSC_PER1			0x0cc
>> +#define DP_QSERDES_V8_COM_SSC_PER2			0x0d0
>> +#define DP_QSERDES_V8_COM_BIAS_EN_CLKBUFLR_EN		0x0dc
>> +#define DP_QSERDES_V8_COM_CLK_ENABLE1			0x0e0
>> +#define DP_QSERDES_V8_COM_SYS_CLK_CTRL			0x0e4
>> +#define DP_QSERDES_V8_COM_SYSCLK_BUF_ENABLE		0x0e8
>> +#define DP_QSERDES_V8_COM_PLL_IVCO			0x0f4
>> +#define DP_QSERDES_V8_COM_SYSCLK_EN_SEL			0x110
>> +#define DP_QSERDES_V8_COM_RESETSM_CNTRL			0x118
>> +#define DP_QSERDES_V8_COM_LOCK_CMP_EN			0x120
>> +#define DP_QSERDES_V8_COM_VCO_TUNE_CTRL			0x13c
>> +#define DP_QSERDES_V8_COM_VCO_TUNE_MAP			0x140
>> +#define DP_QSERDES_V8_COM_CLK_SELECT			0x164
>> +#define DP_QSERDES_V8_COM_CORE_CLK_EN			0x170
>> +#define DP_QSERDES_V8_COM_CMN_CONFIG_1			0x174
> 
> The registers are the same at least up to this point. Would it make
> sense to keep common part in the same header and define only those bits
> that actually differ between DP and PCIe parts? (Is it really about PCIe
> or is it eDP vs everything else?)

No, there's a wild amount of variation between various "v8" PHYs and this
is impossible to catch by eye

Konrad