[PATCH v3 4/5] phy: qcom: qmp-combo: get the USB3 & DisplayPort lanes mapping from DT
Neil Armstrong
neil.armstrong at linaro.org
Mon Sep 8 06:04:21 PDT 2025
The QMP USB3/DP Combo PHY hosts an USB3 phy and a DP PHY on top
of a combo glue to route either lanes to the 4 shared physical lanes.
The routing of the lanes can be:
- 2 DP + 2 USB3
- 4 DP
- 2 USB3
Get the lanes mapping from DT and stop registering the USB-C
muxes in favor of a static mode and orientation detemined
by the lanes mapping.
This allows supporting boards with direct connection of USB3 and
DisplayPort lanes to the QMP Combo PHY lanes, not using the
USB-C Altmode feature.
Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 132 ++++++++++++++++++++++++++++--
1 file changed, 124 insertions(+), 8 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 7b5af30f1d028c592500e723ecd27b54ed554709..f3f91a69dc8b81e049cd06f7ab4f04baf57776cd 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -13,6 +13,7 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/of_graph.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
@@ -1744,6 +1745,21 @@ static const u8 qmp_dp_v6_pre_emphasis_hbr_rbr[4][4] = {
{ 0x22, 0xff, 0xff, 0xff }
};
+static const u32 usb3_data_lane_mapping[][2] = {
+ [TYPEC_ORIENTATION_NORMAL] = { 1, 0 },
+ [TYPEC_ORIENTATION_REVERSE] = { 2, 3 },
+};
+
+static const u32 dp_2_data_lanes_mapping[][2] = {
+ [TYPEC_ORIENTATION_NORMAL] = { 0, 1 },
+ [TYPEC_ORIENTATION_REVERSE] = { 3, 2 },
+};
+
+static const u32 dp_4_data_lanes_mapping[][4] = {
+ [TYPEC_ORIENTATION_NORMAL] = { 0, 1, 2, 3 },
+ [TYPEC_ORIENTATION_REVERSE] = { 3, 2, 1, 0 },
+};
+
struct qmp_combo;
struct qmp_combo_offsets {
@@ -4167,9 +4183,114 @@ static int qmp_combo_probe(struct platform_device *pdev)
if (ret)
goto err_node_put;
- ret = qmp_combo_typec_register(qmp);
- if (ret)
- goto err_node_put;
+ qmp->qmpphy_mode = QMPPHY_MODE_USB3DP;
+
+ if (of_find_property(dev->of_node, "mode-switch", NULL) ||
+ of_find_property(dev->of_node, "orientation-switch", NULL)) {
+ ret = qmp_combo_typec_register(qmp);
+ if (ret)
+ goto err_node_put;
+ } else {
+ enum typec_orientation usb3_orientation = TYPEC_ORIENTATION_NONE;
+ enum typec_orientation dp_orientation = TYPEC_ORIENTATION_NONE;
+ struct device_node *usb3_ep, *dp_ep;
+ u32 data_lanes[4];
+ int count, i;
+
+ usb3_ep = of_graph_get_endpoint_by_regs(dev->of_node, 0, 0);
+ dp_ep = of_graph_get_endpoint_by_regs(dev->of_node, 0, 1);
+
+ if (usb3_ep) {
+ ret = of_property_count_u32_elems(usb3_ep, "data-lanes");
+ if (ret == -EINVAL)
+ /* Property isn't here, ignore property */
+ goto usb3_mapping_done;
+ if (ret < 0)
+ goto err_node_put;
+
+ count = ret;
+ if (count != 2)
+ /* Property size is invalid, ignore property */
+ goto usb3_mapping_done;
+
+ ret = of_property_read_u32_array(usb3_ep, "data-lanes", data_lanes, count);
+ if (ret)
+ goto err_node_put;
+
+ for (i = TYPEC_ORIENTATION_NORMAL; i <= TYPEC_ORIENTATION_REVERSE; i++)
+ if (!memcmp(data_lanes, usb3_data_lane_mapping[i], sizeof(u32) * 2))
+ break;
+
+ if (i >= TYPEC_ORIENTATION_REVERSE)
+ /* Property value is invalid, ignore property */
+ goto usb3_mapping_done;
+
+ usb3_orientation = i;
+ }
+
+usb3_mapping_done:
+ of_node_put(usb3_ep);
+
+ if (dp_ep) {
+ ret = of_property_count_u32_elems(dp_ep, "data-lanes");
+ if (ret == -EINVAL)
+ /* Property isn't here, ignore property */
+ goto dp_mapping_done;
+ if (ret < 0)
+ goto err_node_put;
+
+ count = ret;
+ if (count != 2 && count != 4)
+ /* Property size is invalid, ignore property */
+ goto dp_mapping_done;
+
+ ret = of_property_read_u32_array(dp_ep, "data-lanes", data_lanes, count);
+
+ if (ret)
+ goto err_node_put;
+
+ for (i = TYPEC_ORIENTATION_NORMAL; i <= TYPEC_ORIENTATION_REVERSE; i++) {
+ switch (count) {
+ case 2:
+ ret = memcmp(data_lanes, dp_2_data_lanes_mapping[i],
+ sizeof(u32) * count);
+ break;
+ case 4:
+ ret = memcmp(data_lanes, dp_4_data_lanes_mapping[i],
+ sizeof(u32) * count);
+ break;
+ }
+
+ if (!ret)
+ break;
+ }
+
+ if (i >= TYPEC_ORIENTATION_REVERSE)
+ /* Property value is invalid, ignore property */
+ goto dp_mapping_done;
+
+ dp_orientation = i;
+ }
+
+dp_mapping_done:
+ of_node_put(dp_ep);
+
+ if (dp_orientation == TYPEC_ORIENTATION_NONE &&
+ usb3_orientation != TYPEC_ORIENTATION_NONE) {
+ qmp->qmpphy_mode = QMPPHY_MODE_USB3_ONLY;
+ qmp->orientation = usb3_orientation;
+ } else if (usb3_orientation == TYPEC_ORIENTATION_NONE &&
+ dp_orientation != TYPEC_ORIENTATION_NONE) {
+ qmp->qmpphy_mode = QMPPHY_MODE_DP_ONLY;
+ qmp->orientation = dp_orientation;
+ } else if (dp_orientation != TYPEC_ORIENTATION_NONE &&
+ dp_orientation == usb3_orientation) {
+ qmp->qmpphy_mode = QMPPHY_MODE_USB3DP;
+ qmp->orientation = dp_orientation;
+ } else {
+ dev_warn(dev, "unable to determine orientation & mode from data-lanes");
+ }
+ }
ret = drm_aux_bridge_register(dev);
if (ret)
@@ -4189,11 +4310,6 @@ static int qmp_combo_probe(struct platform_device *pdev)
if (ret)
goto err_node_put;
- /*
- * The hw default is USB3_ONLY, but USB3+DP mode lets us more easily
- * check both sub-blocks' init tables for blunders at probe time.
- */
- qmp->qmpphy_mode = QMPPHY_MODE_USB3DP;
qmp->usb_phy = devm_phy_create(dev, usb_np, &qmp_combo_usb_phy_ops);
if (IS_ERR(qmp->usb_phy)) {
--
2.34.1
More information about the linux-phy
mailing list