[PATCH v4 1/6] dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Reference usb-switch.yaml to allow mode-switch

[Neil Armstrong]

On 04/09/2025 17:18, Konrad Dybcio wrote:
> On 8/22/25 11:20 PM, Rob Herring wrote:
>> On Thu, Aug 07, 2025 at 06:33:19PM +0200, Konrad Dybcio wrote:
>>> From: Neil Armstrong <neil.armstrong at linaro.org>
>>>
>>> The QMP USB3/DP Combo PHY can work in 3 modes:
>>> - DisplayPort Only
>>> - USB3 Only
>>> - USB3 + DisplayPort Combo mode
>>>
>>> In order to switch between those modes, the PHY needs to receive
>>> Type-C events, allow marking to the phy with the mode-switch
>>> property in order to allow the PHY to Type-C events.
>>>
>>> Reference usb-switch.yaml as a simpler way to allow the mode-switch
>>> property instead of duplicating the property definition.
>>>
>>> Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
>>> Reviewed-by: Krzysztof Kozlowski <krzk at kernel.org>
>>> Signed-off-by: Konrad Dybcio <konrad.dybcio at oss.qualcomm.com>
>>> ---
>>>   .../devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml     | 7 +++----
>>>   1 file changed, 3 insertions(+), 4 deletions(-)
>>>
>>> diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
>>> index 38ce04c35d945d0d8d319191c241920810ee9005..c8bc512df08b5694c8599f475de78679a4438449 100644
>>> --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
>>> +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
>>> @@ -73,10 +73,8 @@ properties:
>>>       description:
>>>         See include/dt-bindings/phy/phy-qcom-qmp.h
>>>   
>>> -  orientation-switch:
>>> -    description:
>>> -      Flag the PHY as possible handler of USB Type-C orientation switching
>>> -    type: boolean
>>> +  mode-switch: true
>>> +  orientation-switch: true
>>>   
>>>     ports:
>>>       $ref: /schemas/graph.yaml#/properties/ports
>>> @@ -106,6 +104,7 @@ required:
>>>     - "#phy-cells"
>>>   
>>>   allOf:
>>> +  - $ref: /schemas/usb/usb-switch.yaml#
>>
>> As reported already in this thread, this adds a crap load of warnings as
>> it makes ports or port required. Sigh. Can QCom folks pay more attention
>> to this please. Every cycle the number goes up though that's often
>> temporary because there's no coordination of taking .dts files after
>> bindings. But generally, progress on QCom warnings has stalled.
>>
>> Here's the top (bottom?) platforms in arm64. The first number is
>> total warnings. The 2nd number is unique warnings (to remove inflated
>> numbers due to lots of boards per SoC).
> 
> I'm sorry this happened, Rob.
> 
> I assumed this was a solved problem as I picked up this series, but
> of course not testing always ends up biting..

My bad actually, I didn't figure out the ports definition would conflict,
I sent a fixup patch at https://lore.kernel.org/all/20250902-topic-sm8x50-fix-qmp-usb43dp-usb-switch-v1-1-5b4a51c8c5a8@linaro.org/

Neil

> 
> Konrad