[PATCH v2 0/7] Introduce SpacemiT K1 PCIe phy and host controller

[Alex Elder]

On 10/28/25 3:48 PM, Johannes Erdfelt wrote:
> On Tue, Oct 28, 2025, Alex Elder <elder at riscstar.com> wrote:
>> On 10/28/25 1:42 PM, Johannes Erdfelt wrote:
>>> I have been testing this patchset recently as well, but on an Orange Pi
>>> RV2 board instead (and an extra RV2 specific patch to enable power to
>>> the M.2 slot).
>>>
>>> I ran into the same symptoms you had ("QID 0 timeout" after about 60
>>> seconds). However, I'm using an Intel 600p. I can confirm my NVME drive
>>> seems to work fine with the "pcie_aspm=off" workaround as well.
>>
>> I don't see this problem, and haven't tried to reproduce it yet.
>>
>> Mani told me I needed to add these lines to ensure the "runtime
>> PM hierarchy of PCIe chain" won't be "broken":
>>
>> 	pm_runtime_set_active()
>> 	pm_runtime_no_callbacks()
>> 	devm_pm_runtime_enable()
>>
>> Just out of curiosity, could you try with those lines added
>> just before these assignments in k1_pcie_probe()?
>>
>> 	k1->pci.dev = dev;
>> 	k1->pci.ops = &k1_pcie_ops;
>> 	dw_pcie_cap_set(&k1->pci, REQ_RES);
>>
>> I doubt it will fix what you're seeing, but at the moment I'm
>> working on something else.
> 
> Unfortunately there is no difference with the runtime PM hierarchy
> additions.
> 
> JE

Thank you very much for testing.  I'll try to learn more
about this in the next day or so and will resolve it if
possible before I send the next version of this code.

					-Alex