[PATCH v8 7/7] arm64: dts: renesas: rzg3s-smarc: Enable USB support
Claudiu Beznea
claudiu.beznea at tuxon.dev
Fri Oct 24 02:51:28 PDT 2025
Hi, Geert,
On 10/24/25 12:15, Geert Uytterhoeven wrote:
> Hi Claudiu,
>
> On Thu, 23 Oct 2025 at 20:41, Claudiu <claudiu.beznea at tuxon.dev> wrote:
>> From: Claudiu Beznea <claudiu.beznea.uj at bp.renesas.com>
>>
>> Enable USB support (host, device, USB PHYs).
>>
>> Reviewed-by: Geert Uytterhoeven <geert+renesas at glider.be>
>> Tested-by: Wolfram Sang <wsa+renesas at sang-engineering.com>
>> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj at bp.renesas.com>
>
> Thanks for your patch!
>
>> --- a/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi
>> +++ b/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi
>
>> &pinctrl {
>> audio_clock_pins: audio-clock {
>> pins = "AUDIO_CLK1", "AUDIO_CLK2";
>> @@ -207,6 +230,27 @@ ssi3_pins: ssi3 {
>> <RZG2L_PORT_PINMUX(18, 4, 8)>, /* TXD */
>> <RZG2L_PORT_PINMUX(18, 5, 8)>; /* RXD */
>> };
>> +
>> + usb0_pins: usb0 {
>> + peri {
>> + pinmux = <RZG2L_PORT_PINMUX(5, 0, 1)>, /* VBUS */
>> + <RZG2L_PORT_PINMUX(5, 2, 1)>; /* OVC */
>> + };
>> +
>> + otg {
>> + pinmux = <RZG2L_PORT_PINMUX(5, 3, 1)>; /* OTG_ID */
>> + bias-pull-up;
>> + };
>> + };
>> +
>> + usb1_pins: usb1 {
>> + pinmux = <RZG2L_PORT_PINMUX(5, 4, 5)>, /* OVC */
>> + <RZG2L_PORT_PINMUX(6, 0, 1)>; /* VBUS */
>> + };
>> +};
>> +
>> +&phyrst {
>> + status = "okay";
>> };
>
> This node should be located before pinctrl.
You're right! I missed it.
> No need to resend just for this.
Thank you!
>
> Gr{oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> -- Linus Torvalds
More information about the linux-phy
mailing list