[PATCH 15/15] arm64: dts: mediatek: mt7981b-openwrt-one: Enable leds

[Sjoerd Simons]

Hey,

On Fri, 2025-10-17 at 19:35 +0200, Andrew Lunn wrote:
> On Thu, Oct 16, 2025 at 12:08:51PM +0200, Sjoerd Simons wrote:
> > The Openwrt One has 3 status leds at the front (red, white, green) as
> > well as 2 software controlled leds for the LAN jack (amber, green).
> 
> A previous patch in this series added 2 PHY LEDs. Are they connected
> to a LAN jack? Are there multiple RJ45 connectors? Is it clear from
> /sys/class/leds what LED is what?

Yeah there are two RJ45 jacks. One referred to as WAN in the openwrt one
documentation (2.5G), which uses phy integrated leds. One referred to as LAN,
which for some reason is using software controlled leds rather then the phy's
led controller, which this patch adds support for.

When applying this set you'll get:
```
root at openwrt-debian:/sys/class/leds# ls -1                                     
amber:lan                                                                      
green:lan                                                                      
green:status                                                                   
mdio-bus:0f:amber:wan                                                          
mdio-bus:0f:green:wan                                                          
mt76-phy0                                                                      
mt76-phy1                                                                      
red:status                                                                     
white:status                       
```

Which is hopefully clear enough



-- 
Sjoerd Simons <sjoerd at collabora.com>
Collabora