[PATCH 01/15] arm64: dts: mediatek: mt7981b: Add labels to commonly referenced nodes

Sjoerd Simons sjoerd at collabora.com
Thu Oct 16 03:08:37 PDT 2025


Add labels to various device nodes in the MT7981B DTSI, similar to other
mediatek dtsi files.

Signed-off-by: Sjoerd Simons <sjoerd at collabora.com>
---
 arch/arm64/boot/dts/mediatek/mt7981b.dtsi | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt7981b.dtsi b/arch/arm64/boot/dts/mediatek/mt7981b.dtsi
index 58c99f2a25218..6b024156fa7c5 100644
--- a/arch/arm64/boot/dts/mediatek/mt7981b.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7981b.dtsi
@@ -14,14 +14,14 @@ cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu at 0 {
+		cpu0: cpu at 0 {
 			compatible = "arm,cortex-a53";
 			reg = <0x0>;
 			device_type = "cpu";
 			enable-method = "psci";
 		};
 
-		cpu at 1 {
+		cpu1: cpu at 1 {
 			compatible = "arm,cortex-a53";
 			reg = <0x1>;
 			device_type = "cpu";
@@ -29,7 +29,7 @@ cpu at 1 {
 		};
 	};
 
-	oscillator-40m {
+	clk40m: oscillator-40m {
 		compatible = "fixed-clock";
 		clock-frequency = <40000000>;
 		clock-output-names = "clkxtal";
@@ -82,7 +82,7 @@ apmixedsys: clock-controller at 1001e000 {
 			#clock-cells = <1>;
 		};
 
-		pwm at 10048000 {
+		pwm: pwm at 10048000 {
 			compatible = "mediatek,mt7981-pwm";
 			reg = <0 0x10048000 0 0x1000>;
 			clocks = <&infracfg CLK_INFRA_PWM_STA>,
@@ -127,7 +127,7 @@ uart2: serial at 11004000 {
 			status = "disabled";
 		};
 
-		i2c at 11007000 {
+		i2c0: i2c at 11007000 {
 			compatible = "mediatek,mt7981-i2c";
 			reg = <0 0x11007000 0 0x1000>,
 			      <0 0x10217080 0 0x80>;
@@ -142,7 +142,7 @@ i2c at 11007000 {
 			status = "disabled";
 		};
 
-		spi at 11009000 {
+		spi2: spi at 11009000 {
 			compatible = "mediatek,mt7981-spi-ipm", "mediatek,spi-ipm";
 			reg = <0 0x11009000 0 0x1000>;
 			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
@@ -156,7 +156,7 @@ spi at 11009000 {
 			status = "disabled";
 		};
 
-		spi at 1100a000 {
+		spi0: spi at 1100a000 {
 			compatible = "mediatek,mt7981-spi-ipm", "mediatek,spi-ipm";
 			reg = <0 0x1100a000 0 0x1000>;
 			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
@@ -170,7 +170,7 @@ spi at 1100a000 {
 			status = "disabled";
 		};
 
-		spi at 1100b000 {
+		spi1: spi at 1100b000 {
 			compatible = "mediatek,mt7981-spi-ipm", "mediatek,spi-ipm";
 			reg = <0 0x1100b000 0 0x1000>;
 			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
@@ -184,7 +184,7 @@ spi at 1100b000 {
 			status = "disabled";
 		};
 
-		thermal at 1100c800 {
+		thermal: thermal at 1100c800 {
 			compatible = "mediatek,mt7981-thermal",
 				     "mediatek,mt7986-thermal";
 			reg = <0 0x1100c800 0 0x800>;
@@ -231,7 +231,7 @@ pio: pinctrl at 11d00000 {
 			#interrupt-cells = <2>;
 		};
 
-		efuse at 11f20000 {
+		efuse: efuse at 11f20000 {
 			compatible = "mediatek,mt7981-efuse", "mediatek,efuse";
 			reg = <0 0x11f20000 0 0x1000>;
 			#address-cells = <1>;
@@ -246,14 +246,14 @@ thermal_calibration: thermal-calib at 274 {
 			};
 		};
 
-		clock-controller at 15000000 {
+		ethsys: clock-controller at 15000000 {
 			compatible = "mediatek,mt7981-ethsys", "syscon";
 			reg = <0 0x15000000 0 0x1000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 		};
 
-		wifi at 18000000 {
+		wifi: wifi at 18000000 {
 			compatible = "mediatek,mt7981-wmac";
 			reg = <0 0x18000000 0 0x1000000>,
 			      <0 0x10003000 0 0x1000>,

-- 
2.51.0




More information about the linux-phy mailing list