[PATCH v4 2/4] dt-bindings: PCI: qcom: Document the Glymur PCIe Controller

[Qiang Yu]

On Sat, Oct 11, 2025 at 03:15:56PM +0300, Abel Vesa wrote:
> On 25-09-03 23:22:03, Wenbin Yao wrote:
> > From: Prudhvi Yarlagadda <quic_pyarlaga at quicinc.com>
> > 
> > On the Qualcomm Glymur platform the PCIe host is compatible with the DWC
> > controller present on the X1E80100 platform. So document the PCIe
> > controllers found on Glymur and use the X1E80100 compatible string as a
> > fallback in the schema.
> > 
> > Signed-off-by: Prudhvi Yarlagadda <quic_pyarlaga at quicinc.com>
> > Signed-off-by: Wenbin Yao <wenbin.yao at oss.qualcomm.com>
> > Acked-by: Rob Herring (Arm) <robh at kernel.org>
> > ---
> >  Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml | 7 ++++++-
> >  1 file changed, 6 insertions(+), 1 deletion(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml
> > index 257068a1826492a7071600d03ca0c99babb75bd9..8600f2c74cb81bcb924fa2035d992c3bd147db31 100644
> > --- a/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml
> > +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml
> > @@ -16,7 +16,12 @@ description:
> >  
> >  properties:
> >    compatible:
> > -    const: qcom,pcie-x1e80100
> > +    oneOf:
> > +      - const: qcom,pcie-x1e80100
> > +      - items:
> > +          - enum:
> > +              - qcom,glymur-pcie
> > +          - const: qcom,pcie-x1e80100
> >  
> 
> The cnoc_sf_axi clock is not found on Glymur, at least according to this:
> 
> https://lore.kernel.org/all/20250925-v3_glymur_introduction-v1-19-24b601bbecc0@oss.qualcomm.com/

There is another dtbinding patch to fix this issue

https://lore.kernel.org/all/20250919142325.1090059-1-pankaj.patil@oss.qualcomm.com/
> 
> And dtbs_check reports the following:
> 
> arch/arm64/boot/dts/qcom/glymur-crd.dtb: pci at 1b40000 (qcom,glymur-pcie): clock-names: ['aux', 'cfg', 'bus_master', 'bus_slave', 'slave_q2a', 'noc_aggr'] is too short
>         from schema $id: http://devicetree.org/schemas/pci/qcom,pcie-x1e80100.yaml#
> 
> One more thing:
> 
> arch/arm64/boot/dts/qcom/glymur-crd.dtb: pci at 1b40000 (qcom,glymur-pcie): max-link-speed: 5 is not one of [1, 2, 3, 4]
>         from schema $id: http://devicetree.org/schemas/pci/qcom,pcie-x1e80100.yaml#
> 
> max-link-speed = <5> isn't yet supported and of_pci_get_max_link_speed returns -EINVAL and sets pci->max_link_speed to that
> without checking the error.
> 
> So I guess fun stuff is happening based on that later on ...

My bad, but at least on QCOM platform, we will get max_link_speed from
config space if < 1.

if (pci->max_link_speed < 1) {
	pci->max_link_speed = FIELD_GET(PCI_EXP_LNKCAP_SLS, cap);
	return;
}

- Qiang Yu