[PATCH v2 3/4] dt-bindings: phy: google: Add Google Tensor G5 USB PHY

[Roy Luo]

On Wed, Oct 8, 2025 at 4:58 PM Krzysztof Kozlowski <krzk at kernel.org> wrote:
>
> On 08/10/2025 14:59, Roy Luo wrote:
> > Document the device tree bindings for the USB PHY interfaces integrated
> > with the DWC3 controller on Google Tensor SoCs, starting with G5
> > generation.
> >
> > Due to a complete architectural overhaul in the Google Tensor G5, the
> > existing Samsung/Exynos USB PHY driver and binding for older generations
> > of Google silicons such as gs101 are no longer compatible.
> >
> > The USB PHY on Tensor G5 includes two integrated Synopsys PHY IPs: the
> > eUSB 2.0 PHY IP and the USB 3.2/DisplayPort combo PHY IP. Currently only
> > USB high-speed is described and supported.
> >
> > Signed-off-by: Roy Luo <royluo at google.com>
> > ---
> >  .../bindings/phy/google,gs-usb-phy.yaml       | 96 +++++++++++++++++++
> >  1 file changed, 96 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/phy/google,gs-usb-phy.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/phy/google,gs-usb-phy.yaml b/Documentation/devicetree/bindings/phy/google,gs-usb-phy.yaml
> > new file mode 100644
> > index 000000000000..22961e2da6ef
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/phy/google,gs-usb-phy.yaml
> > @@ -0,0 +1,96 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +# Copyright (C) 2025, Google LLC
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/phy/google,gs-usb-phy.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Google Tensor Series (G5+) USB PHY
> > +
> > +maintainers:
> > +  - Roy Luo <royluo at google.com>
> > +
> > +description: |
> > +  Describes the USB PHY interfaces integrated with the DWC3 USB controller on
> > +  Google Tensor SoCs, starting with the G5 generation.
> > +  Two specific PHY IPs from Synopsys are integrated, including eUSB 2.0 PHY IP
> > +  and USB 3.2/DisplayPort combo PHY IP.
> > +  The first phandle argument within the PHY specifier is used to identify the
> > +  desired PHY. The currently supported value is::
>
> Currently supported as hardware will change? You describe here hardware
> ONLY.

I wanted to explain the PHY specifier as I saw other bindings are also doing it,
e.g. "Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml".
Theoretically the hardware supports 3 PHY interfaces: high-speed, super-speed
and DP, however, the corresponding driver only supports high-speed at the
moment.
I can still document all the 3 PHY interfaces and assign them with
a theoretical specifier value here as that's what the hardware is capable of,
and then make it clear that only high-speed is currently supported on the driver
side. Does this make sense to you?

>
> > +    0 - USB high-speed.
> > +
> > +properties:
> > +  compatible:
> > +    items:
> > +      - enum:
> > +          - google,gs5-usb-phy
> > +
> > +  reg:
> > +    minItems: 3
> > +    maxItems: 3
> > +
> > +  reg-names:
> > +    items:
> > +      - const: usb2_cfg_csr
> > +      - const: dp_top_csr
> > +      - const: usb_top_cfg_csr
>
> Drop csr
>

Ack, will fix it in the next patch.

> > +
> > +  "#phy-cells":
> > +    const: 1
> > +
> > +  clocks:
> > +    maxItems: 1
> > +
> > +  clock-names:
> > +    items:
> > +      - const: usb2_phy_clk
>
> Drop names, pointless for one entry.
>

Ack, will fix it in the next patch.

> > +
> > +  resets:
> > +    maxItems: 1
> > +
> > +  reset-names:
> > +    items:
> > +      - const: usb2_phy_reset
>
> Drop names, pointless for one entry.
>

Ack, will fix it in the next patch.

> > +
> > +  power-domains:
> > +    maxItems: 1
> > +
> > +  orientation-switch:
> > +    type: boolean
> > +    description:
> > +      Indicates the PHY as a handler of USB Type-C orientation changes
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - reg-names
> > +  - "#phy-cells"
> > +  - clocks
> > +  - clock-names
> > +  - resets
> > +  - reset-names
> > +
> > +unevaluatedProperties: false
> > +
>
>
> additionalProps instead. Read writing schema or example schema.
>

Ack, will fix this in the next patch.
Appreciate the review!

Thanks,
Roy Luo

>
> Best regards,
> Krzysztof