[PATCH] dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: do not reference whole usb-switch.yaml

[Neil Armstrong]

On 10/1/25 18:31, Rob Herring wrote:
> On Tue, Sep 30, 2025 at 10:10:25PM +0300, Dmitry Baryshkov wrote:
>> On Fri, Sep 05, 2025 at 12:55:33PM -0500, Rob Herring wrote:
>>> On Tue, Sep 02, 2025 at 06:10:05PM +0200, Neil Armstrong wrote:
>>>> Both bindings describe a different layout of the ports properties,
>>>> leading to errors when validating DT using this PHY bindings as
>>>> reported by Rob Herring.
>>>>
>>>> Reported-by: Rob Herring <robh at kernel.org>
>>>> Closes: https://lore.kernel.org/all/175462129176.394940.16810637795278334342.robh@kernel.org/
>>>> Fixes: 3bad7fe22796 ("dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Reference usb-switch.yaml to allow mode-switch")
>>>> Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
>>>> ---
>>>>   .../devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml    | 8 +++++---
>>>>   1 file changed, 5 insertions(+), 3 deletions(-)
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
>>>> index c8bc512df08b5694c8599f475de78679a4438449..5005514d7c3a1e4a8893883497fd204bc04e12be 100644
>>>> --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
>>>> +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
>>>> @@ -73,8 +73,11 @@ properties:
>>>>       description:
>>>>         See include/dt-bindings/phy/phy-qcom-qmp.h
>>>>   
>>>> -  mode-switch: true
>>>> -  orientation-switch: true
>>>> +  mode-switch:
>>>> +    $ref: /schemas/usb/usb-switch.yaml#properties/mode-switch
>>>> +
>>>> +  orientation-switch:
>>>> +    $ref: /schemas/usb/usb-switch.yaml#properties/orientation-switch
> 
> Looking at this again, this isn't even correct and I don't think it
> works. It's missing a '/' and  should be ...#/properties/... to be a
> valid json pointer.
> 
> I thought we checked this...
> 
>>>
>>> This is a pattern we try to avoid with references at a property level. I
>>> prefer you make port and ports not required in usb-switch.yaml.
>>
>> But this solution is also not perfect. E.g.
>> Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml should
>> only allow the orienttion-switch property, while using
>> allOf:$ref:usb-switch.yaml allows all three (orientation-switch,
>> mode-switch, retimer-switch).
> 
> That can be handled like this:
> 
> $ref: usb-switch.yaml
> properties:
>    orientation-switch: true
> additionalProperties: false
> 
> Though if you need unevaluatedProperties for some other reason, then
> that won't enforce it and it's just documentation. In that case, then
> perhaps usb-switch.yaml is not the right granularity and should be split
> up.

I tried :
    - $ref: /schemas/usb/usb-switch.yaml#
+      properties:
+        mode-switch: true
+        orientation-switch: true
+      additionalProperties: false

But it doesn't work:
phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml:108:17: [error] syntax error: mapping values are not allowed here (syntax)
phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml:108:17: mapping values are not allowed in this context
   DTEX    Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.example.dts
phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml:108:17: mapping values are not allowed in this context

> 
> I put this into the category of "this is the least of our problems". I'm
> not that interested in enforcing what common properties a device uses or
> not. It's undocumented properties I'm worried about or lack of
> constraints (on reg, clocks, interrupts, etc.).

I'll revert the patch until we find a proper solution.

Neil>
> Rob