[PATCH 6/6] phy: qcom: sgmii-eth: add second regulator support

[Konrad Dybcio]

On 11/24/25 10:25 AM, Mohd Ayaan Anwar wrote:
> The Qualcomm SGMII SerDes PHY requires two regulators to function
> properly. If both of these are not enabled, the following error is
> observed:
> [   77.105651] qcom-dwmac-sgmii-phy 8909000.phy: QSERDES_COM_C_READY_STATUS timed-out
> [   77.113447] qcom-ethqos 23040000.ethernet eth0: __stmmac_open: Serdes powerup failed
> 
> Therefore, add support for handling the additional regulator in the
> driver.
> 
> Fixes: 601d06277007 ("phy: qcom: add the SGMII SerDes PHY driver")
> Signed-off-by: Mohd Ayaan Anwar <mohd.anwar at oss.qualcomm.com>
> ---

[...]

> -	return clk_prepare_enable(data->refclk);
> +	ret = regulator_enable(data->vdda_0p9);
> +	if (ret)
> +		goto out_ret;

'goto return' can just become 'return'

[...]

> +	data->vdda_0p9 = devm_regulator_get(dev, "vdda-0p9");
> +	if (IS_ERR(data->vdda_0p9))
> +		return PTR_ERR(data->vdda_0p9);

Do we have any conclusions on the load discussion?

Konrad