[PATCH] phy: qcom-qmp-combo: Use regulator_bulk_data with init_load_uA for regulator setup

[Bjorn Andersson]

On Mon, Sep 22, 2025 at 07:29:01PM +0530, Faisal Hassan wrote:
> Replace the custom qmp_regulator_data structure with the standard
> regulator_bulk_data and use the init_load_uA field to set regulator
> load during initialization.
> 
> This change simplifies the regulator setup by removing manual
> allocation and load configuration logic, and leverages
> devm_regulator_bulk_get_const() to automatically apply load settings
> before enabling regulators.
> 

Reviewed-by: Bjorn Andersson <andersson at kernel.org>

Regards,
Bjorn

> Signed-off-by: Faisal Hassan <faisal.hassan at oss.qualcomm.com>
> ---
>  drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 49 +++--------------------
>  1 file changed, 6 insertions(+), 43 deletions(-)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> index f07d097b129f..97262ed63700 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> @@ -1636,14 +1636,9 @@ static const struct qmp_phy_init_tbl x1e80100_usb43dp_pcs_usb_tbl[] = {
>  };
>  
>  /* list of regulators */
> -struct qmp_regulator_data {
> -	const char *name;
> -	unsigned int enable_load;
> -};
> -
> -static struct qmp_regulator_data qmp_phy_vreg_l[] = {
> -	{ .name = "vdda-phy", .enable_load = 21800 },
> -	{ .name = "vdda-pll", .enable_load = 36000 },
> +static struct regulator_bulk_data qmp_phy_vreg_l[] = {
> +	{ .supply = "vdda-phy", .init_load_uA = 21800, },
> +	{ .supply = "vdda-pll", .init_load_uA = 36000, },
>  };
>  
>  static const u8 qmp_dp_v3_pre_emphasis_hbr3_hbr2[4][4] = {
> @@ -1801,7 +1796,7 @@ struct qmp_phy_cfg {
>  	const char * const *reset_list;
>  	int num_resets;
>  	/* regulators to be requested */
> -	const struct qmp_regulator_data *vreg_list;
> +	const struct regulator_bulk_data *vreg_list;
>  	int num_vregs;
>  
>  	/* array of registers with different offsets */
> @@ -3403,39 +3398,6 @@ static const struct dev_pm_ops qmp_combo_pm_ops = {
>  			   qmp_combo_runtime_resume, NULL)
>  };
>  
> -static int qmp_combo_vreg_init(struct qmp_combo *qmp)
> -{
> -	const struct qmp_phy_cfg *cfg = qmp->cfg;
> -	struct device *dev = qmp->dev;
> -	int num = cfg->num_vregs;
> -	int ret, i;
> -
> -	qmp->vregs = devm_kcalloc(dev, num, sizeof(*qmp->vregs), GFP_KERNEL);
> -	if (!qmp->vregs)
> -		return -ENOMEM;
> -
> -	for (i = 0; i < num; i++)
> -		qmp->vregs[i].supply = cfg->vreg_list[i].name;
> -
> -	ret = devm_regulator_bulk_get(dev, num, qmp->vregs);
> -	if (ret) {
> -		dev_err(dev, "failed at devm_regulator_bulk_get\n");
> -		return ret;
> -	}
> -
> -	for (i = 0; i < num; i++) {
> -		ret = regulator_set_load(qmp->vregs[i].consumer,
> -					cfg->vreg_list[i].enable_load);
> -		if (ret) {
> -			dev_err(dev, "failed to set load at %s\n",
> -				qmp->vregs[i].supply);
> -			return ret;
> -		}
> -	}
> -
> -	return 0;
> -}
> -
>  static int qmp_combo_reset_init(struct qmp_combo *qmp)
>  {
>  	const struct qmp_phy_cfg *cfg = qmp->cfg;
> @@ -4003,7 +3965,8 @@ static int qmp_combo_probe(struct platform_device *pdev)
>  	if (ret)
>  		return ret;
>  
> -	ret = qmp_combo_vreg_init(qmp);
> +	ret = devm_regulator_bulk_get_const(dev, qmp->cfg->num_vregs,
> +					qmp->cfg->vreg_list, &qmp->vregs);
>  	if (ret)
>  		return ret;
>  
> -- 
> 2.17.1
> 
>