[PATCH v2 1/2] phy: renesas: rcar-gen3-usb2: Move phy_data->init_bus check

[Neil Armstrong]

On 11/19/25 13:04, Claudiu wrote:
> From: Claudiu Beznea <claudiu.beznea.uj at bp.renesas.com>
> 
> Move the check of phy_data->init_bus from rcar_gen3_phy_usb2_init_bus()
> to rcar_gen3_phy_usb2_probe() to avoid having it duplicated in both the
> probe path and the upcoming resume code. This is a preparatory patch.
> 
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj at bp.renesas.com>
> ---
> 
> Changes in v2:
> - none; this patch is new
> 
>   drivers/phy/renesas/phy-rcar-gen3-usb2.c | 11 ++++++-----
>   1 file changed, 6 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
> index a38ead7c8055..b9d5bb52e02c 100644
> --- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c
> +++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
> @@ -782,6 +782,9 @@ static int rcar_gen3_phy_usb2_init_bus(struct rcar_gen3_chan *channel)
>   	int ret;
>   	u32 val;
>   
> +	if (!channel->phy_data->init_bus)
> +		return 0;
> +
>   	rstc = devm_reset_control_array_get_shared(dev);
>   	if (IS_ERR(rstc))
>   		return PTR_ERR(rstc);
> @@ -861,11 +864,9 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
>   	platform_set_drvdata(pdev, channel);
>   	channel->dev = dev;
>   
> -	if (channel->phy_data->init_bus) {
> -		ret = rcar_gen3_phy_usb2_init_bus(channel);
> -		if (ret)
> -			goto error;
> -	}
> +	ret = rcar_gen3_phy_usb2_init_bus(channel);
> +	if (ret)
> +		goto error;
>   
>   	spin_lock_init(&channel->lock);
>   	for (i = 0; i < NUM_OF_PHYS; i++) {

Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>