[PATCH v3 04/21] dt-bindings: reset: renesas,rzv2h-usb2phy: Document VBUS_SEL mux

[Krzysztof Kozlowski]

On Mon, Nov 10, 2025 at 01:08:04PM +0100, Tommaso Merciai wrote:
> Document the 'mux-controller' child node in the Renesas RZ/V2H(P)
> USB2PHY reset binding to support describing the USB VBUS_SEL
> multiplexer as a mux-controller.
> 
> This is required to properly configure the USB PHY VBUS source on
> RZ/V2H(P), RZ/G3E SoCs.

And where did you explain why this cannot be folded into parent node? If
you do not provide context why reviewer's advice cannot be fulfilled,
then you will get the same comment.

> 
> Signed-off-by: Tommaso Merciai <tommaso.merciai.xr at bp.renesas.com>
> ---
> v2->v3:
>  - Manipulate mux-controller as an internal node.
>  - Improved commit body.
> 
> v1->v2:
>  - New patch
> 
>  .../bindings/reset/renesas,rzv2h-usb2phy-reset.yaml   | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/reset/renesas,rzv2h-usb2phy-reset.yaml b/Documentation/devicetree/bindings/reset/renesas,rzv2h-usb2phy-reset.yaml
> index c1b800a10b53..03da74ff2d08 100644
> --- a/Documentation/devicetree/bindings/reset/renesas,rzv2h-usb2phy-reset.yaml
> +++ b/Documentation/devicetree/bindings/reset/renesas,rzv2h-usb2phy-reset.yaml
> @@ -37,6 +37,12 @@ properties:
>    '#reset-cells':
>      const: 0
>  
> +  mux-controller:
> +    $ref: /schemas/mux/mux-controller.yaml#
> +    description: Mux controller for USB VBUS source selection.
> +    type: object
> +    unevaluatedProperties: false
> +
>  required:
>    - compatible
>    - reg
> @@ -44,6 +50,7 @@ required:
>    - resets
>    - power-domains
>    - '#reset-cells'
> +  - mux-controller
>  
>  additionalProperties: false
>  
> @@ -58,4 +65,8 @@ examples:
>          resets = <&cpg 0xaf>;
>          power-domains = <&cpg>;
>          #reset-cells = <0>;
> +
> +        mux-controller {
> +          #mux-state-cells = <1>;

Do not mix up indentation.

Best regards,
Krzysztof