[PATCH 2/2] dt-bindings: phy: lan966x: Add optional microchip,sx-tx/rx-inverted

[Horatiu Vultur]

This allows to invert the N and P signals of the RX and TX Serdes
signals. This option allows the board designer to trace their signals
easier on the boards.

Signed-off-by: Horatiu Vultur <horatiu.vultur at microchip.com>
---
 .../phy/microchip,lan966x-serdes.yaml         | 24 +++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/microchip,lan966x-serdes.yaml b/Documentation/devicetree/bindings/phy/microchip,lan966x-serdes.yaml
index 6e914fbbac567..21b19e06a75aa 100644
--- a/Documentation/devicetree/bindings/phy/microchip,lan966x-serdes.yaml
+++ b/Documentation/devicetree/bindings/phy/microchip,lan966x-serdes.yaml
@@ -41,6 +41,30 @@ properties:
       - The macro to be used. The macros are defined in
         dt-bindings/phy/phy-lan966x-serdes.
 
+  microchip,s0-tx-inverted:
+    type: boolean
+    description: Invert the TX N and P signals for Serdes 0
+
+  microchip,s1-tx-inverted:
+    type: boolean
+    description: Invert the TX N and P signals for Serdes 1
+
+  microchip,s2-tx-inverted:
+    type: boolean
+    description: Invert the TX N and P signals for Serdes 2
+
+  microchip,s0-rx-inverted:
+    type: boolean
+    description: Invert the RX N and P signals for Serdes 0
+
+  microchip,s1-rx-inverted:
+    type: boolean
+    description: Invert the RX N and P signals for Serdes 1
+
+  microchip,s2-rx-inverted:
+    type: boolean
+    description: Invert the RX N and P signals for Serdes 2
+
 required:
   - compatible
   - reg
-- 
2.34.1