[PATCH 4/7] phy: phy-snps-eusb2: clean up error messages

neil.armstrong at linaro.org neil.armstrong at linaro.org
Mon May 26 00:50:09 PDT 2025


On 23/05/2025 10:48, Johan Hovold wrote:
> Clean up the error messages by using a consistent format with a colon
> followed by a space and an errno (or unsupported frequency).
> 
> Signed-off-by: Johan Hovold <johan+linaro at kernel.org>
> ---
>   drivers/phy/phy-snps-eusb2.c | 14 +++++++-------
>   1 file changed, 7 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/phy/phy-snps-eusb2.c b/drivers/phy/phy-snps-eusb2.c
> index c8f14f8fb9ac..232c5e8a554f 100644
> --- a/drivers/phy/phy-snps-eusb2.c
> +++ b/drivers/phy/phy-snps-eusb2.c
> @@ -256,7 +256,7 @@ static int exynos_eusb2_ref_clk_init(struct snps_eusb2_hsphy *phy)
>   	}
>   
>   	if (!config) {
> -		dev_err(&phy->phy->dev, "unsupported ref_clk_freq:%lu\n", ref_clk_freq);
> +		dev_err(&phy->phy->dev, "unsupported ref_clk_freq: %lu\n", ref_clk_freq);
>   		return -EINVAL;
>   	}
>   
> @@ -293,7 +293,7 @@ static int qcom_eusb2_ref_clk_init(struct snps_eusb2_hsphy *phy)
>   	}
>   
>   	if (!config) {
> -		dev_err(&phy->phy->dev, "unsupported ref_clk_freq:%lu\n", ref_clk_freq);
> +		dev_err(&phy->phy->dev, "unsupported ref_clk_freq: %lu\n", ref_clk_freq);
>   		return -EINVAL;
>   	}
>   
> @@ -461,19 +461,19 @@ static int snps_eusb2_hsphy_init(struct phy *p)
>   
>   	ret = phy_init(phy->repeater);
>   	if (ret) {
> -		dev_err(&p->dev, "repeater init failed. %d\n", ret);
> +		dev_err(&p->dev, "repeater init failed: %d\n", ret);
>   		goto disable_vreg;
>   	}
>   
>   	ret = clk_bulk_prepare_enable(phy->data->num_clks, phy->clks);
>   	if (ret) {
> -		dev_err(&p->dev, "failed to enable ref clock, %d\n", ret);
> +		dev_err(&p->dev, "failed to enable ref clock: %d\n", ret);
>   		goto exit_repeater;
>   	}
>   
>   	ret = reset_control_assert(phy->phy_reset);
>   	if (ret) {
> -		dev_err(&p->dev, "failed to assert phy_reset, %d\n", ret);
> +		dev_err(&p->dev, "failed to assert phy_reset: %d\n", ret);
>   		goto disable_clks;
>   	}
>   
> @@ -481,7 +481,7 @@ static int snps_eusb2_hsphy_init(struct phy *p)
>   
>   	ret = reset_control_deassert(phy->phy_reset);
>   	if (ret) {
> -		dev_err(&p->dev, "failed to de-assert phy_reset, %d\n", ret);
> +		dev_err(&p->dev, "failed to de-assert phy_reset: %d\n", ret);
>   		goto disable_clks;
>   	}
>   
> @@ -588,7 +588,7 @@ static int snps_eusb2_hsphy_probe(struct platform_device *pdev)
>   
>   	generic_phy = devm_phy_create(dev, NULL, &snps_eusb2_hsphy_ops);
>   	if (IS_ERR(generic_phy)) {
> -		dev_err(dev, "failed to create phy %d\n", ret);
> +		dev_err(dev, "failed to create phy: %d\n", ret);
>   		return PTR_ERR(generic_phy);
>   	}
>   

Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>



More information about the linux-phy mailing list