[PATCH V5 09/11] scsi: ufs: qcom : Refactor phy_power_on/off calls

Manivannan Sadhasivam manivannan.sadhasivam at linaro.org
Wed May 21 06:57:31 PDT 2025


On Thu, May 15, 2025 at 09:57:20PM +0530, Nitin Rawat wrote:
> Commit 3f6d1767b1a0 ("phy: ufs-qcom: Refactor all init steps into
> phy_poweron") removes the phy_power_on/off from ufs_qcom_setup_clocks

s/removes/moved

> to suspend/resume func.
> 
> To have a better power saving, remove the phy_power_on/off calls from
> resume/suspend path and put them back to ufs_qcom_setup_clocks, so that
> PHY regulators & clks can be turned on/off along with UFS's clocks.
> 
> Since phy phy_power_on is separated out from phy calibrate, make
> separate calls to phy_power_on and phy_calibrate calls from ufs qcom
> driver.
> 

This patch is not calling phy_calibrate().

> Co-developed-by: Can Guo <quic_cang at quicinc.com>
> Signed-off-by: Can Guo <quic_cang at quicinc.com>
> Signed-off-by: Nitin Rawat <quic_nitirawa at quicinc.com>
> ---
>  drivers/ufs/host/ufs-qcom.c | 61 ++++++++++++++++++-------------------
>  1 file changed, 29 insertions(+), 32 deletions(-)
> 

[...]

>  static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on,
>  				 enum ufs_notify_change_status status)
>  {
>  	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
> +	struct phy *phy = host->generic_phy;
> +	int err;
>  
>  	/*
>  	 * In case ufs_qcom_init() is not yet done, simply ignore.
> @@ -1157,10 +1141,22 @@ static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on,
>  				/* disable device ref_clk */
>  				ufs_qcom_dev_ref_clk_ctrl(host, false);
>  			}
> +
> +			err = phy_power_off(phy);
> +			if (err) {
> +				dev_err(hba->dev, "phy power off failed, ret=%d\n", err);
> +				return err;
> +			}
>  		}
>  		break;
>  	case POST_CHANGE:
>  		if (on) {
> +			err = phy_power_on(phy);
> +			if (err) {
> +				dev_err(hba->dev, "phy power on failed, ret = %d\n", err);
> +				return err;
> +			}
> +
>  			/* enable the device ref clock for HS mode*/
>  			if (ufshcd_is_hs_mode(&hba->pwr_info))
>  				ufs_qcom_dev_ref_clk_ctrl(host, true);
> @@ -1343,9 +1339,10 @@ static int ufs_qcom_init(struct ufs_hba *hba)
>  static void ufs_qcom_exit(struct ufs_hba *hba)
>  {
>  	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
> +	struct phy *phy = host->generic_phy;
>  
>  	ufs_qcom_disable_lane_clks(host);
> -	phy_power_off(host->generic_phy);
> +	phy_power_off(phy);

This change is not at all needed.

- Mani

-- 
மணிவண்ணன் சதாசிவம்



More information about the linux-phy mailing list