[PATCH v5 2/6] dt-bindings: PCI: qcom,pcie-sa8775p: document qcs8300
Krzysztof Kozlowski
krzk at kernel.org
Wed May 7 03:03:14 PDT 2025
On 07/05/2025 11:56, Qiang Yu wrote:
>
> On 5/7/2025 4:25 PM, Krzysztof Kozlowski wrote:
>> On 07/05/2025 10:19, Ziyue Zhang wrote:
>>> On 5/7/2025 1:10 PM, Krzysztof Kozlowski wrote:
>>>> On Wed, May 07, 2025 at 11:10:15AM GMT, Ziyue Zhang wrote:
>>>>> Add compatible for qcs8300 platform, with sa8775p as the fallback.
>>>>>
>>>>> Signed-off-by: Ziyue Zhang <quic_ziyuzhan at quicinc.com>
>>>>> ---
>>>>> .../bindings/pci/qcom,pcie-sa8775p.yaml | 26 ++++++++++++++-----
>>>>> 1 file changed, 19 insertions(+), 7 deletions(-)
>>>>>
>>>>> diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml
>>>>> index efde49d1bef8..154bb60be402 100644
>>>>> --- a/Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml
>>>>> +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml
>>>>> @@ -16,7 +16,12 @@ description:
>>>>>
>>>>> properties:
>>>>> compatible:
>>>>> - const: qcom,pcie-sa8775p
>>>>> + oneOf:
>>>>> + - const: qcom,pcie-sa8775p
>>>>> + - items:
>>>>> + - enum:
>>>>> + - qcom,pcie-qcs8300
>>>>> + - const: qcom,pcie-sa8775p
>>>>>
>>>>> reg:
>>>>> minItems: 6
>>>>> @@ -45,7 +50,7 @@ properties:
>>>>>
>>>>> interrupts:
>>>>> minItems: 8
>>>>> - maxItems: 8
>>>>> + maxItems: 9
>>>> I don't understand why this is flexible for sa8775p. I assume this
>>>> wasn't tested or finished, just like your previous patch suggested.
>>>>
>>>> Please send complete bindings once you finish them or explain what
>>>> exactly changed in the meantime.
>>>>
>>>> Best regards,
>>>> Krzysztof
>>> Hi Krzysztof
>>> Global interrupt is optional in the PCIe driver. It is not present in
>>> the SA8775p PCIe device tree node, but it is required for the QCS8300
>> And hardware?
>
> The PCIe controller on the SA8775p is also capable of generating a global
> interrupt.
>>> I did the DTBs and yaml checks before pushing this patch. This is how
>>> I became aware that `maxItem` needed to be changed to 9.
>> If it is required for QCS8300, then you are supposed to make it required
>> in the binding for this device. Look at other bindings.
>
> The global interrupt is not mandatory. The PCIe driver can still function
> without this interrupt, but it will offer a better user experience when
> the device is plugged in or removed. On other platforms, the global
> interrupt is also optional, and `minItems` and `maxItems` are set to 8 and
> 9 respectively. Please refer to `qcom,pcie - sm8550.yaml`,
> `qcom,pcie - sm8450.yaml`, and `qcom,pcie - x1e80100.yaml`.
I don't know what does it prove. You cannot add requirement of global
interrupt to existing devices because it would be an ABI break.
Best regards,
Krzysztof
More information about the linux-phy
mailing list