[PATCH V4 06/11] phy: qcom-qmp-ufs: Rename qmp_ufs_power_off

[Dmitry Baryshkov]

On Sun, May 04, 2025 at 06:37:41PM +0300, Dmitry Baryshkov wrote:
> On Sat, May 03, 2025 at 09:54:35PM +0530, Nitin Rawat wrote:
> > Rename qmp_ufs_disable to qmp_ufs_power_off to better represent its
> > functionality. Additionally, move the qmp_ufs_exit() call inside
> > qmp_ufs_power_off to preserve the functionality of .power_off.
> > 
> > There is no functional change.
> > 
> > Signed-off-by: Nitin Rawat <quic_nitirawa at quicinc.com>
> > ---
> >  drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 30 +++++++++----------------
> >  1 file changed, 11 insertions(+), 19 deletions(-)
> > 
> > diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> > index 94095393148c..c501223fc5f9 100644
> > --- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> > +++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> > @@ -1835,6 +1835,15 @@ static int qmp_ufs_phy_calibrate(struct phy *phy)
> >  	return 0;
> >  }
> > 
> > +static int qmp_ufs_exit(struct phy *phy)
> > +{
> > +	struct qmp_ufs *qmp = phy_get_drvdata(phy);
> > +
> > +	qmp_ufs_com_exit(qmp);
> 
> Just inline it, unless you have any other plans.

I mean, inline a call to qmp_ufs_com_exit() into qmp_ufs_power_off().

> 
> > +
> > +	return 0;
> > +}
> > +
> >  static int qmp_ufs_power_off(struct phy *phy)
> >  {
> >  	struct qmp_ufs *qmp = phy_get_drvdata(phy);
> > @@ -1851,28 +1860,11 @@ static int qmp_ufs_power_off(struct phy *phy)
> >  	qphy_clrbits(qmp->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
> >  			SW_PWRDN);
> > 
> > -	return 0;
> > -}
> > -
> > -static int qmp_ufs_exit(struct phy *phy)
> > -{
> > -	struct qmp_ufs *qmp = phy_get_drvdata(phy);
> > -
> > -	qmp_ufs_com_exit(qmp);
> > +	qmp_ufs_exit(phy);
> > 
> >  	return 0;
> >  }
> > 
> > -static int qmp_ufs_disable(struct phy *phy)
> > -{
> > -	int ret;
> > -
> > -	ret = qmp_ufs_power_off(phy);
> > -	if (ret)
> > -		return ret;
> > -	return qmp_ufs_exit(phy);
> > -}
> > -
> >  static int qmp_ufs_set_mode(struct phy *phy, enum phy_mode mode, int submode)
> >  {
> >  	struct qmp_ufs *qmp = phy_get_drvdata(phy);
> > @@ -1921,7 +1913,7 @@ static int qmp_ufs_phy_init(struct phy *phy)
> >  static const struct phy_ops qcom_qmp_ufs_phy_ops = {
> >  	.init		= qmp_ufs_phy_init,
> >  	.power_on	= qmp_ufs_power_on,
> > -	.power_off	= qmp_ufs_disable,
> > +	.power_off	= qmp_ufs_power_off,
> >  	.calibrate	= qmp_ufs_phy_calibrate,
> >  	.set_mode	= qmp_ufs_set_mode,
> >  	.owner		= THIS_MODULE,
> > --
> > 2.48.1
> > 
> 
> -- 
> With best wishes
> Dmitry
> 
> -- 
> linux-phy mailing list
> linux-phy at lists.infradead.org
> https://lists.infradead.org/mailman/listinfo/linux-phy

-- 
With best wishes
Dmitry