[PATCH v7 5/6] arm64: dts: qcom: ipq5018: Add PCIe related nodes

[Manivannan Sadhasivam]

On Wed, Mar 26, 2025 at 12:10:59PM +0400, George Moussalem via B4 Relay wrote:
> From: Nitheesh Sekar <quic_nsekar at quicinc.com>
> 
> Add phy and controller nodes for a 2-lane Gen2 and
> a 1-lane Gen2 PCIe bus. IPQ5018 has 8 MSI SPI interrupts and
> one global interrupt.
> 
> NOTE: the PCIe controller supports gen3, yet the phy is limited to gen2.
> 
> Signed-off-by: Nitheesh Sekar <quic_nsekar at quicinc.com>
> Signed-off-by: Sricharan R <quic_srichara at quicinc.com>
> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at oss.qualcomm.com>
> Signed-off-by: George Moussalem <george.moussalem at outlook.com>
> ---
>  arch/arm64/boot/dts/qcom/ipq5018.dtsi | 246 +++++++++++++++++++++++++++++++++-
>  1 file changed, 244 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> index 8914f2ef0bc47fda243b19174f77ce73fc10757d..9f695f0d9c6b7f29c4564977cadd6a78b55a044f 100644
> --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> @@ -147,6 +147,40 @@ usbphy0: phy at 5b000 {
>  			status = "disabled";
>  		};
>  
> +		pcie1_phy: phy at 7e000{
> +			compatible = "qcom,ipq5018-uniphy-pcie-phy";
> +			reg = <0x0007e000 0x800>;
> +
> +			clocks = <&gcc GCC_PCIE1_PIPE_CLK>;
> +
> +			resets = <&gcc GCC_PCIE1_PHY_BCR>,
> +				 <&gcc GCC_PCIE1PHY_PHY_BCR>;
> +
> +			#clock-cells = <0>;
> +			#phy-cells = <0>;
> +
> +			num-lanes = <1>;
> +
> +			status = "disabled";
> +		};
> +
> +		pcie0_phy: phy at 86000{
> +			compatible = "qcom,ipq5018-uniphy-pcie-phy";
> +			reg = <0x00086000 0x800>;
> +
> +			clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
> +
> +			resets = <&gcc GCC_PCIE0_PHY_BCR>,
> +				 <&gcc GCC_PCIE0PHY_PHY_BCR>;
> +
> +			#clock-cells = <0>;
> +			#phy-cells = <0>;
> +
> +			num-lanes = <2>;
> +
> +			status = "disabled";
> +		};
> +
>  		tlmm: pinctrl at 1000000 {
>  			compatible = "qcom,ipq5018-tlmm";
>  			reg = <0x01000000 0x300000>;
> @@ -170,8 +204,8 @@ gcc: clock-controller at 1800000 {
>  			reg = <0x01800000 0x80000>;
>  			clocks = <&xo_board_clk>,
>  				 <&sleep_clk>,
> -				 <0>,
> -				 <0>,
> +				 <&pcie0_phy>,
> +				 <&pcie1_phy>,
>  				 <0>,
>  				 <0>,
>  				 <0>,
> @@ -387,6 +421,214 @@ frame at b128000 {
>  				status = "disabled";
>  			};
>  		};
> +
> +		pcie1: pcie at 80000000 {
> +			compatible = "qcom,pcie-ipq5018";
> +			reg = <0x80000000 0xf1d>,
> +			      <0x80000f20 0xa8>,
> +			      <0x80001000 0x1000>,
> +			      <0x00078000 0x3000>,
> +			      <0x80100000 0x1000>,
> +			      <0x0007b000 0x1000>;
> +			reg-names = "dbi",
> +				    "elbi",
> +				    "atu",
> +				    "parf",
> +				    "config",
> +				    "mhi";
> +			device_type = "pci";
> +			linux,pci-domain = <0>;
> +			bus-range = <0x00 0xff>;
> +			num-lanes = <1>;
> +			#address-cells = <3>;
> +			#size-cells = <2>;
> +
> +			/*
> +			 * In IPQ5018, the PCIe controller supports gen3,

nit: no need to mention IPQ5018.

- Mani

-- 
மணிவண்ணன் சதாசிவம்