[PATCH 1/3] dt-bindings: phy: qcom-edp: Add missing clock for X Elite

[Rob Herring (Arm)]

On Wed, 30 Jul 2025 14:46:48 +0300, Abel Vesa wrote:
> On X Elite platform, the eDP PHY uses one more clock called
> refclk. Add it to the schema.
> 
> Cc: stable at vger.kernel.org # v6.10
> Fixes: 5d5607861350 ("dt-bindings: phy: qcom-edp: Add X1E80100 PHY compatibles")
> Signed-off-by: Abel Vesa <abel.vesa at linaro.org>
> ---
>  .../devicetree/bindings/phy/qcom,edp-phy.yaml      | 23 +++++++++++++++++++++-
>  1 file changed, 22 insertions(+), 1 deletion(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.example.dtb: phy at aec2a00 (qcom,sa8775p-edp-phy): clock-names: ['aux', 'cfg_ahb'] is too short
	from schema $id: http://devicetree.org/schemas/phy/qcom,edp-phy.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.example.dtb: phy at aec2a00 (qcom,sc7280-edp-phy): clock-names: ['aux', 'cfg_ahb'] is too short
	from schema $id: http://devicetree.org/schemas/phy/qcom,edp-phy.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/qcom,edp-phy.example.dtb: phy at aec2a00 (qcom,sc8180x-edp-phy): clock-names: ['aux', 'cfg_ahb'] is too short
	from schema $id: http://devicetree.org/schemas/phy/qcom,edp-phy.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250730-phy-qcom-edp-add-missing-refclk-v1-1-6f78afeadbcf@linaro.org

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.