[PATCH 24/38] arm64: dts: mediatek: mt7986a-bpi-r3: Fix SFP I2C node names
Fei Shao
fshao at chromium.org
Fri Jul 25 03:50:41 PDT 2025
On Thu, Jul 24, 2025 at 5:49 PM AngeloGioacchino Del Regno
<angelogioacchino.delregno at collabora.com> wrote:
>
> The binding wants the node to be named "i2c-number", alternatively
> "i2c at address", but those are named "i2c-gpio-number" instead.
>
> Rename those to i2c-0, i2c-1 to adhere to the binding and suppress
> dtbs_check warnings.
>
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
It'd be nice to mention in v2 (if needed) that this patch also drops
redundant #address-cells and #size-cells, but it's minor.
Reviewed-by: Fei Shao <fshao at chromium.org>
> ---
> arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts | 8 ++------
> 1 file changed, 2 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
> index ed79ad1ae871..6d2762866a1a 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
> @@ -64,23 +64,19 @@ wps-key {
> };
>
> /* i2c of the left SFP cage (wan) */
> - i2c_sfp1: i2c-gpio-0 {
> + i2c_sfp1: i2c-0 {
> compatible = "i2c-gpio";
> sda-gpios = <&pio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> scl-gpios = <&pio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> i2c-gpio,delay-us = <2>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> };
>
> /* i2c of the right SFP cage (lan) */
> - i2c_sfp2: i2c-gpio-1 {
> + i2c_sfp2: i2c-1 {
> compatible = "i2c-gpio";
> sda-gpios = <&pio 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> scl-gpios = <&pio 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> i2c-gpio,delay-us = <2>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> };
>
> leds {
> --
> 2.50.1
>
>
More information about the linux-phy
mailing list