[PATCH v4 1/6] dt-bindings: phy: samsung,usb3-drd-phy: add ExynosAutov920 HS phy compatible

[Alim Akhtar]

> -----Original Message-----
> From: Krzysztof Kozlowski <krzk at kernel.org>
> Sent: Wednesday, July 23, 2025 2:13 PM
> To: Pritam Manohar Sutar <pritam.sutar at samsung.com>; 'Krzysztof
> Kozlowski' <krzysztof.kozlowski at linaro.org>
> Cc: vkoul at kernel.org; kishon at kernel.org; robh at kernel.org;
[snip]
> >>>>> Ok got it. Will change supplies name as below avdd075_usb =>
> >>>>> avdd075-usb
> >>>>> avdd18_usb20 => avdd18-usb20
> >>>>> avdd33_usb20 => avdd33-usb20
> >>>>>
> >>>>> Confirm the above change that is meant in terms of DTS style.
> >>>> Yes. I have doubts that actual supplies have suffix usb20. Are
> >>>> there more than one avdd18 for this block?
> >>>>
> >>>
> >>> Yes, there are more than one vdd18 supplies for this block.
> >>
> >> And their names are?
> >>
> >>>
> >>> Re-analysed your comment on adding new supplies.
> >>> Going to re-use existing supplies as mentioned below, rather than
> >>> introducing new supplies
> >>>
> >>>   dvdd-usb20-supply   => for 0.75v
> >>>   vddh-usb20-supply   => for 1.8v
> >>>   vdd33-usb20-supply => for 3.3v
> >>
> >>
> >> You just expect us to guess whether this is correct...
> >
> > Sorry about not being clear so far.
> >
> > V920 needs three supplies, 0.75v, 1.8v and 3.3v for USB PHY The naming
> > convention used in the schematic are avdd075-usb, avdd18_usb20,
> > avdd33_usb20.
> >
> > However, PHY's user manual just mentions DVDD, VDD33 and VDD18.
> 
> 
> Then dvdd, vdd33 and vdd18.
> 
> > Since GS101 binding already using supply names similar to what is
> mentioned in the PHY user manual.
> 
> 
> GS101 has USB 2.0 and DP, thus the suffix made some sense. I think you have
> only USB 2.0, that's why I question the suffix.
> 
I cross checked the schematic of v920 SADK, this is a combo PHY which support USB-3.0 as well. 
@ Pritam
Schema should capture all the supplies including USB-3.0, similar to GS101 (which has USB2.0 and DP combo).
So that would be as below:
dvdd075-usb20-supply
vdd18-usb20-supply
vdd33-usb20-supply
dvdd075-usb30-supply
vdd18-usb30-supply
please cross check the supply at your end and do the needful. 

> 
> Best regards,
> Krzysztof