[PATCH v4 0/2] Fix PLL lock timeout and calibration wait time

[Tomi Valkeinen]

Hi,

On 04/07/2025 15:59, Devarsh Thakkar wrote:
> This fixes PLL lockup and O_CMN_READY timeout by moving the polling
> function after common state machine gets enabled. Also fix the
> calibration wait time to optimize the polling time.
> 
> NOTE: This needs to be applied on top of  
>   https://lore.kernel.org/all/20250618-cdns-dsi-impro-v4-4-862c841dbe02@ideasonboard.com/           
>   https://lore.kernel.org/all/20250618-cdns-dsi-impro-v4-5-862c841dbe02@ideasonboard.com/           
>   from the series:                                                                                  
>   https://lore.kernel.org/all/20250618-cdns-dsi-impro-v4-0-862c841dbe02@ideasonboard.com/    
> 
> Changelog:
> V4:                                                                                                 
> - Optimize wait_for_pll_lock, wait_for_cmn_ready calls to oneline                                   
>   using conditional operator                                                                        
> - Remove superflous init for ret variable in cdns_dphy_configure                                    
> - Enable pll and psm ref clocks before configuring PLL                                              
> - Update commit message to refer to TRM                                                             
> - Rebased on top of:                                                                                
>   https://lore.kernel.org/all/20250618-cdns-dsi-impro-v4-4-862c841dbe02@ideasonboard.com/           
>   https://lore.kernel.org/all/20250618-cdns-dsi-impro-v4-5-862c841dbe02@ideasonboard.com/           
>   from the series:                                                                                  
>   https://lore.kernel.org/all/20250618-cdns-dsi-impro-v4-0-862c841dbe02@ideasonboard.com/    
> 
> V3: 
> -   Use read-modify-write for using calibrated value for PLL
>     lock time
> -   Move out PLL clock configuration part to power_on function
> 
> V2: Separate patch for calibration logic and
>     return error code on polling 
> 
> Previous versions:
> V3: https://lore.kernel.org/all/20250502033451.2291330-1-devarsht@ti.com/
> V2: https://lore.kernel.org/all/20250326152320.3835249-1-devarsht@ti.com/
> V1: https://lore.kernel.org/all/20241230125319.941372-1-devarsht@ti.com/
> 
> Test logs:
> Link: https://gist.github.com/devarsht/d08d851399ca327e5594266a8d66d478
> 
> Rangediff:
> V3->V4:
> https://gist.github.com/devarsht/e4db52e1f4aec2d45596b3ed019e92ef
> 
> V2->V3:
> https://gist.github.com/devarsht/c4d2c4f6715ec7aa4df4cb2c7991b7aa
> 
> Devarsh Thakkar (2):
>   phy: cadence: cdns-dphy: Fix PLL lock and O_CMN_READY polling
>   phy: cadence: cdns-dphy: Update calibration wait time for startup
>     state machine
> 
>  drivers/phy/cadence/cdns-dphy.c | 126 ++++++++++++++++++++++++--------
>  1 file changed, 94 insertions(+), 32 deletions(-)
> 

For the series:

Reviewed-by: Tomi Valkeinen <tomi.valkeinen at ideasonboard.com>

 Tomi