[PATCH v3 3/4] arm64: dts: qcom: sa8775p: remove aux clock from pcie phy
Konrad Dybcio
konrad.dybcio at oss.qualcomm.com
Tue Jul 15 04:47:37 PDT 2025
On 7/10/25 12:24 PM, Ziyue Zhang wrote:
>
> On 7/10/2025 5:43 PM, Johan Hovold wrote:
>> On Fri, Jun 27, 2025 at 04:50:57PM +0200, Konrad Dybcio wrote:
>>> On 6/25/25 11:00 AM, Ziyue Zhang wrote:
>>>> gcc_aux_clk is used in PCIe RC and it is not required in pcie phy, in
>>>> pcie phy it should be gcc_phy_aux_clk, so remove gcc_aux_clk and
>>>> replace it with gcc_phy_aux_clk.
>>> GCC_PCIE_n_PHY_AUX_CLK is a downstream of the PHY's output..
>>> are you sure the PHY should be **consuming** it too?
>> Could we get a reply here, please?
>>
>> A bunch of Qualcomm SoCs in mainline do exactly this currently even
>> though it may not be correct (and some downstream dts do not use these
>> clocks).
>>
>> Johan
>
> Hi Johan
>
> After reviewing the downstream platforms, it seems that GCC_PCIE_n_PHY_AUX_CLK
> is generally needed. Would you mind letting us know if there are any platforms
> where this clock is not required?
Do you base this on "downstream has it", or did you check with the
relevant folks internally? I'm still unconvinced by the clock looping back
to the PHY.
Konrad
More information about the linux-phy
mailing list