[PATCH 1/2] dt-bindings: phy: qcom: Add MIPI CSI2 C-PHY/DPHY Combo schema

[Rob Herring]

On Thu, Jul 10, 2025 at 05:16:47PM +0100, Bryan O'Donoghue wrote:
> Add a base schema initially compatible with x1e80100 to describe MIPI CSI2
> PHY devices.
> 
> The hardware can support both C-PHY and D-PHY modes. The CSIPHY devices
> have their own pinouts on the SoC as well as their own individual voltage
> rails.
> 
> The need to model voltage rails on a per-PHY basis leads us to define
> CSIPHY devices as individual nodes.
> 
> Two nice outcomes in terms of schema and DT arise from this change.
> 
> 1. The ability to define on a per-PHY basis voltage rails.
> 2. The ability to require those voltage.
> 
> We have had a complete bodge upstream for this where a single set of
> voltage rail for all CSIPHYs has been buried inside of CAMSS.
> 
> Much like the I2C bus which is dedicated to Camera sensors - the CCI bus in
> CAMSS parlance, the CSIPHY devices should be individually modelled.
> 
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue at linaro.org>
> ---
>  .../phy/qcom,x1e80100-mipi-csi2-combo-phy.yaml     | 95 ++++++++++++++++++++++
>  1 file changed, 95 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/phy/qcom,x1e80100-mipi-csi2-combo-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,x1e80100-mipi-csi2-combo-phy.yaml
> new file mode 100644
> index 0000000000000000000000000000000000000000..e0976f012516452ae3632ff4732620b5c5402d3b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/qcom,x1e80100-mipi-csi2-combo-phy.yaml
> @@ -0,0 +1,95 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/qcom,x1e80100-mipi-csi2-combo-phy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm MIPI CSI2 Combo PHY
> +
> +maintainers:
> +  - Bryan O'Donoghue <bod at kernel.org>
> +
> +description:
> +  Qualcomm MIPI CSI2 C-PHY/D-PHY combination PHY. Connects MIPI CSI2 sensors
> +  to Qualcomm's Camera CSI Decoder. The PHY supports both C-PHY and D-PHY
> +  modes.
> +
> +properties:
> +  compatible:
> +    const: qcom,x1e80100-mipi-csi2-combo-phy

Kind of long. CSI2 implies MIPI and is there a non-combo phy for the 
SoC? Could drop either or both mipi and combo...

> +
> +  reg:
> +    maxItems: 1
> +
> +  "#phy-cells":
> +    const: 0
> +
> +  clocks:
> +    maxItems: 4
> +
> +  clock-names:
> +    items:
> +      - const: camnoc_axi
> +      - const: cpas_ahb

These look like the source is included in the name. Is there more than 1 
AXI and AHB bus for this device?

> +      - const: csiphy
> +      - const: csiphy_timer

Module clocks should probably come first.

> +
> +  interrupts:
> +    maxItems: 1
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  vdda-0p8-supply:
> +    description: Phandle to a 0.8V regulator supply to a PHY.
> +
> +  vdda-1p2-supply:
> +    description: Phandle to 1.2V regulator supply to a PHY.
> +
> +  phy-type:
> +    description: D-PHY or C-PHY mode
> +    enum: [ 10, 11 ]
> +    $ref: /schemas/types.yaml#/definitions/uint32

Perhaps putting this in phy cells would be better because the consumer 
decides on the mode.

> +
> +required:
> +  - compatible
> +  - reg
> +  - "#phy-cells"
> +  - clocks
> +  - clock-names
> +  - vdda-0p8-supply
> +  - vdda-1p2-supply
> +  - phy-type
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/qcom,x1e80100-camcc.h>
> +    #include <dt-bindings/clock/qcom,x1e80100-gcc.h>
> +    #include <dt-bindings/phy/phy.h>
> +
> +    csiphy0: csiphy at ace4000 {

Drop unused labels.

> +        compatible = "qcom,x1e80100-mipi-csi2-combo-phy";
> +        reg = <0x0ace4000 0x2000>;
> +        #phy-cells = <0>;
> +
> +        clocks = <&camcc CAM_CC_CAMNOC_AXI_RT_CLK>,
> +                 <&camcc CAM_CC_CPAS_AHB_CLK>,
> +                 <&camcc CAM_CC_CSIPHY0_CLK>,
> +                 <&camcc CAM_CC_CSI0PHYTIMER_CLK>;
> +        clock-names = "camnoc_axi",
> +                      "cpas_ahb",
> +                      "csiphy",
> +                      "csiphy_timer";
> +
> +        interrupts = <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>;
> +
> +        power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
> +
> +        vdda-0p8-supply = <&vreg_l2c_0p8>;
> +        vdda-1p2-supply = <&vreg_l1c_1p2>;
> +
> +        phy-type = <PHY_TYPE_DPHY>;
> +    };
> 
> -- 
> 2.49.0
>