[PATCH v2 4/4] phy: qcom: phy-qcom-snps-eusb2: Add extra register write for Milos

[Luca Weiss]

On Thu Jul 10, 2025 at 2:10 PM CEST, Konrad Dybcio wrote:
> On 7/9/25 11:18 AM, Luca Weiss wrote:
>> As per the downstream devicetree for Milos, add a register write for
>> QCOM_USB_PHY_CFG_CTRL_1 as per the "eUSB2 HPG version 1.0.2 update".
>> 
>> Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>
>> Signed-off-by: Luca Weiss <luca.weiss at fairphone.com>
>> ---
>> The downstream driver supports an arbitrary extra init sequence via
>> qcom,param-override-seq.
>> 
>> volcano-usb.dtsi has the following which is implemented in this patch:
>> 
>>     /* eUSB2 HPG version 1.0.2 update */
>>     qcom,param-override-seq =
>>             <0x00 0x58>;
>> ---
>>  drivers/phy/phy-snps-eusb2.c | 6 ++++++
>>  1 file changed, 6 insertions(+)
>> 
>> diff --git a/drivers/phy/phy-snps-eusb2.c b/drivers/phy/phy-snps-eusb2.c
>> index e232b8b4d29100b8fee9e913e2124788af09f2aa..87fc086424ba4d9fb3ce870aa7f7971a51d4a567 100644
>> --- a/drivers/phy/phy-snps-eusb2.c
>> +++ b/drivers/phy/phy-snps-eusb2.c
>> @@ -420,6 +420,12 @@ static int qcom_snps_eusb2_hsphy_init(struct phy *p)
>>  	/* set default parameters */
>>  	qcom_eusb2_default_parameters(phy);
>>  
>> +	if (of_device_is_compatible(p->dev.of_node, "qcom,milos-snps-eusb2-phy")) {
>> +		/* eUSB2 HPG version 1.0.2 update */
>> +		writel_relaxed(0x0, phy->base + QCOM_USB_PHY_CFG_CTRL_1);
>> +		readl_relaxed(phy->base + QCOM_USB_PHY_CFG_CTRL_1);
>
> Said HPG asks to clear bits [7:1] on all targets

Okay, so make this unconditional and only update those bits instead of
writing the full register?

Keep the write at this location, or move the code somewhere else in the
function?

Regards
Luca

>
> Konrad