[PATCH v4 1/6] dt-bindings: phy: samsung,usb3-drd-phy: add ExynosAutov920 HS phy compatible
Krzysztof Kozlowski
krzysztof.kozlowski at linaro.org
Sun Jul 6 02:40:37 PDT 2025
On Tue, Jul 01, 2025 at 05:37:01PM +0530, Pritam Manohar Sutar wrote:
> Add a dedicated compatible string for USB HS phy found in this SoC.
> The SoC requires two clocks, named "phy" and "ref" (same as clocks
> required by Exynos850).
>
> It also requires various power supplies (regulators) for the internal
> circuitry to work. The required voltages are:
> * avdd075_usb - 0.75v
> * avdd18_usb20 - 1.8v
> * avdd33_usb20 - 3.3v
>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
No, really. Look:
> Signed-off-by: Pritam Manohar Sutar <pritam.sutar at samsung.com>
> ---
> .../bindings/phy/samsung,usb3-drd-phy.yaml | 37 +++++++++++++++++++
> 1 file changed, 37 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml
> index e906403208c0..2e29ff749bba 100644
> --- a/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml
> @@ -34,6 +34,7 @@ properties:
> - samsung,exynos7870-usbdrd-phy
> - samsung,exynos850-usbdrd-phy
> - samsung,exynos990-usbdrd-phy
> + - samsung,exynosautov920-usbdrd-phy
>
> clocks:
> minItems: 1
> @@ -110,6 +111,15 @@ properties:
> vddh-usbdp-supply:
> description: VDDh power supply for the USB DP phy.
>
> + avdd075_usb-supply:
> + description: 0.75V power supply for USB phy
> +
> + avdd18_usb20-supply:
> + description: 1.8V power supply for USB phy
> +
> + avdd33_usb20-supply:
> + description: 3.3V power supply for USB phy
> +
None of these were here. Follow DTS coding style... but why are you
adding completely new supplies?
> required:
> - compatible
> - clocks
> @@ -235,6 +245,33 @@ allOf:
>
> reg-names:
> maxItems: 1
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - samsung,exynosautov920-usbdrd-phy
> + then:
> + properties:
> + clocks:
> + minItems: 2
> + maxItems: 2
> +
> + clock-names:
> + items:
> + - const: phy
> + - const: ref
> +
> + reg:
> + maxItems: 1
> +
> + reg-names:
> + maxItems: 1
> +
> + required:
> + - avdd075_usb-supply
> + - avdd18_usb20-supply
> + - avdd33_usb20-supply
Neither was this entire diff hunk here.
This was part of other block for a reason.
NAK
Best regards,
Krzysztof
More information about the linux-phy
mailing list