[PATCH 4/4] arm64: dts: qcom: ipq5424: Enable PCIe PHYs and controllers

[Varadarajan Narayanan]

On Fri, Dec 13, 2024 at 07:19:50PM +0530, Manikanta Mylavarapu wrote:

[ .  .  . ]

> +&pcie2_phy {
> +	status = "okay";
> +};
> +
> +&pcie2 {
> +	pinctrl-0 = <&pcie2_default_state>;
> +	pinctrl-names = "default";
> +
> +	perst-gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
> +	status = "okay";
> +};

pcie2 should come before pcie2_phy

> +
> +&pcie3_phy {
> +	status = "okay";
> +};
> +
> +&pcie3 {
> +	pinctrl-0 = <&pcie3_default_state>;
> +	pinctrl-names = "default";
> +
> +	perst-gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
> +	status = "okay";
> +};

same here.

-Varada