[PATCH RFT 4/5] phy: renesas: rcar-gen3-usb2: Assert PLL reset on PHY power off

Yoshihiro Shimoda yoshihiro.shimoda.uh at renesas.com
Thu Feb 20 18:12:17 PST 2025


Hello Claudiu-san,

> From: Claudiu, Sent: Thursday, February 20, 2025 1:08 AM
> 
> From: Claudiu Beznea <claudiu.beznea.uj at bp.renesas.com>
> 
> Assert PLL reset on PHY power off. This saves power.
> 
> Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver")
> Cc: stable at vger.kernel.org
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj at bp.renesas.com>
> ---
>  drivers/phy/renesas/phy-rcar-gen3-usb2.c | 9 ++++++++-
>  1 file changed, 8 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
> index 5c0ceba09b67..087937407b0b 100644
> --- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c
> +++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
> @@ -537,9 +537,16 @@ static int rcar_gen3_phy_usb2_power_off(struct phy *p)
>  	struct rcar_gen3_chan *channel = rphy->ch;
>  	int ret = 0;
> 
> -	scoped_guard(spinlock_irqsave, &channel->lock)
> +	scoped_guard(spinlock_irqsave, &channel->lock) {
>  		rphy->powered = false;
> 
> +		if (rcar_gen3_are_all_rphys_power_off(channel)) {
> +			u32 val = readl(channel->base + USB2_USBCTR);
> +			val |= USB2_USBCTR_PLL_RST;

nit: According to the checkpatch.pl:
---
WARNING: Missing a blank line after declarations
#30: FILE: drivers/phy/renesas/phy-rcar-gen3-usb2.c:545:
+                       u32 val = readl(channel->base + USB2_USBCTR);
+                       val |= USB2_USBCTR_PLL_RST;
---

Best regards,
Yoshihiro Shimoda

> +			writel(val, channel->base + USB2_USBCTR);
> +		}
> +	}
> +
>  	if (channel->vbus)
>  		ret = regulator_disable(channel->vbus);
> 
> --
> 2.43.0




More information about the linux-phy mailing list