[PATCH 07/13] arm64: dts: allwinner: a100: add usb related nodes

[Chen-Yu Tsai]

On Fri, Oct 25, 2024 at 1:09 AM Cody Eksal <masterr3c0rd at epochal.quest> wrote:
>
> From: Yangtao Li <frank at allwinnertech.com>
>
> Allwinner A64 have two HCI USB controllers, a OTG controller and a USB

            ^^^ Please update this.

> PHY device, let's add nodes on dts.
>
> Signed-off-by: Yangtao Li <frank at allwinnertech.com>
> [masterr3c0rd at epochal.quest: fallback to a33-musb instead of h3-musb]
> Signed-off-by: Cody Eksal <masterr3c0rd at epochal.quest>
> ---
>  .../arm64/boot/dts/allwinner/sun50i-a100.dtsi | 91 +++++++++++++++++++
>  1 file changed, 91 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
> index adb11b26045f..0aee1b578661 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
> @@ -302,6 +302,97 @@ ths: thermal-sensor at 5070400 {
>                         #thermal-sensor-cells = <1>;
>                 };
>
> +               usbphy: phy at 5100400 {
> +                       #phy-cells = <1>;
> +                       compatible = "allwinner,sun50i-a100-usb-phy";
> +                       reg = <0x05100400 0x14>,
> +                             <0x05101800 0x4>,
> +                             <0x05200800 0x4>;
> +                       reg-names = "phy_ctrl",
> +                                   "pmu0",
> +                                   "pmu1";
> +                       clocks = <&ccu CLK_USB_PHY0>,
> +                                <&ccu CLK_USB_PHY1>;
> +                       clock-names = "usb0_phy",
> +                                     "usb1_phy";
> +                       resets = <&ccu RST_USB_PHY0>,
> +                                <&ccu RST_USB_PHY1>;
> +                       reset-names = "usb0_reset",
> +                                     "usb1_reset";
> +                       status = "disabled";
> +               };
> +
> +               ehci0: usb at 5101000 {
> +                       compatible = "allwinner,sun50i-a100-ehci",
> +                                    "generic-ehci";
> +                       reg = <0x05101000 0x100>;
> +                       interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
> +                       clocks = <&ccu CLK_BUS_OHCI0>,
> +                                <&ccu CLK_BUS_EHCI0>,
> +                                <&ccu CLK_USB_OHCI0>;
> +                       resets = <&ccu RST_BUS_OHCI0>,
> +                                <&ccu RST_BUS_EHCI0>;
> +                       phys = <&usbphy 0>;
> +                       phy-names = "usb";
> +                       status = "disabled";
> +               };
> +
> +               ohci0: usb at 5101400 {
> +                       compatible = "allwinner,sun50i-a100-ohci",
> +                                    "generic-ohci";
> +                       reg = <0x05101400 0x100>;
> +                       interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
> +                       clocks = <&ccu CLK_BUS_OHCI0>,
> +                                <&ccu CLK_USB_OHCI0>;
> +                       resets = <&ccu RST_BUS_OHCI0>;
> +                       phys = <&usbphy 0>;
> +                       phy-names = "usb";
> +                       status = "disabled";
> +               };
> +
> +               usb_otg: usb at 5100000 {
> +                       compatible = "allwinner,sun50i-a100-musb",
> +                                    "allwinner,sun8i-a33-musb";
> +                       reg = <0x05100000 0x0400>;
> +                       clocks = <&ccu CLK_BUS_OTG>;
> +                       resets = <&ccu RST_BUS_OTG>;
> +                       interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> +                       interrupt-names = "mc";
> +                       phys = <&usbphy 0>;
> +                       phy-names = "usb";
> +                       extcon = <&usbphy 0>;
> +                       dr_mode = "otg";
> +                       status = "disabled";
> +               };
> +
> +               ehci1: usb at 5200000 {
> +                       compatible = "allwinner,sun50i-a100-ehci",
> +                                    "generic-ehci";
> +                       reg = <0x05200000 0x100>;
> +                       interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> +                       clocks = <&ccu CLK_BUS_OHCI1>,
> +                                <&ccu CLK_BUS_EHCI1>,
> +                                <&ccu CLK_USB_OHCI1>;
> +                       resets = <&ccu RST_BUS_OHCI1>,
> +                                <&ccu RST_BUS_EHCI1>;
> +                       phys = <&usbphy 1>;
> +                       phy-names = "usb";
> +                       status = "disabled";
> +               };
> +
> +               ohci1: usb at 5200400 {
> +                       compatible = "allwinner,sun50i-a100-ohci",
> +                                    "generic-ohci";
> +                       reg = <0x05200400 0x100>;
> +                       interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> +                       clocks = <&ccu CLK_BUS_OHCI1>,
> +                                <&ccu CLK_USB_OHCI1>;
> +                       resets = <&ccu RST_BUS_OHCI1>;
> +                       phys = <&usbphy 1>;
> +                       phy-names = "usb";
> +                       status = "disabled";
> +               };
> +
>                 r_ccu: clock at 7010000 {
>                         compatible = "allwinner,sun50i-a100-r-ccu";
>                         reg = <0x07010000 0x300>;
> --
> 2.47.0
>
>