[PATCH v5 3/3] phy: rockchip: inno-usb2: Add usb2 phys support for rk3576

Mon Oct 14 23:23:30 PDT 2024

Hi Frank,

Am Freitag, 11. Oktober 2024, 08:51:40 CEST schrieb Frank Wang:
> From: William Wu <william.wu at rock-chips.com>
> 
> The RK3576 SoC has two independent USB2.0 PHYs, and each PHY has
> one port. This adds device specific data for it.
> 
> Signed-off-by: William Wu <william.wu at rock-chips.com>
> Signed-off-by: Frank Wang <frank.wang at rock-chips.com>

this matches nicely with how the other phy variants are done in the
driver. I am not a big fan of the numeric values, but at least the
comments explain what happens.

Reviewed-by: Heiko Stuebner <heiko at sntech.de>

> ---
> Changelog:
> v5:
>  - no changes.
> 
> v4:
>  - split the bulk clock management as a new patch, and this just leave
>    adding rk3576-specific data.
> 
> v3:
>  - amend the commit log adds clocks converting.
>  - retrieve the clock by "clks.id" in *_clk480m_register() function.
> 
> v2:
>  - no changes.
> 
> v1:
>  - https://patchwork.kernel.org/project/linux-phy/patch/20240923025326.10467-2-frank.wang@rock-chips.com/
> 
>  drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 103 ++++++++++++++++++
>  1 file changed, 103 insertions(+)
> 
> diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> index f71266c27091e..96f3d868a526f 100644
> --- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> +++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> @@ -1510,6 +1510,30 @@ static int rk3128_usb2phy_tuning(struct rockchip_usb2phy *rphy)
>  				BIT(2) << BIT_WRITEABLE_SHIFT | 0);
>  }
>  
> +static int rk3576_usb2phy_tuning(struct rockchip_usb2phy *rphy)
> +{
> +	int ret;
> +	u32 reg = rphy->phy_cfg->reg;
> +
> +	/* Deassert SIDDQ to power on analog block */
> +	ret = regmap_write(rphy->grf, reg + 0x0010, GENMASK(29, 29) | 0x0000);
> +	if (ret)
> +		return ret;
> +
> +	/* Do reset after exit IDDQ mode */
> +	ret = rockchip_usb2phy_reset(rphy);
> +	if (ret)
> +		return ret;
> +
> +	/* HS DC Voltage Level Adjustment 4'b1001 : +5.89% */
> +	ret |= regmap_write(rphy->grf, reg + 0x000c, GENMASK(27, 24) | 0x0900);
> +
> +	/* HS Transmitter Pre-Emphasis Current Control 2'b10 : 2x */
> +	ret |= regmap_write(rphy->grf, reg + 0x0010, GENMASK(20, 19) | 0x0010);
> +
> +	return ret;
> +}
> +
>  static int rk3588_usb2phy_tuning(struct rockchip_usb2phy *rphy)
>  {
>  	int ret;
> @@ -1938,6 +1962,84 @@ static const struct rockchip_usb2phy_cfg rk3568_phy_cfgs[] = {
>  	{ /* sentinel */ }
>  };
>  
> +static const struct rockchip_usb2phy_cfg rk3576_phy_cfgs[] = {
> +	{
> +		.reg = 0x0,
> +		.num_ports	= 1,
> +		.phy_tuning	= rk3576_usb2phy_tuning,
> +		.clkout_ctl	= { 0x0008, 0, 0, 1, 0 },
> +		.port_cfgs	= {
> +			[USB2PHY_PORT_OTG] = {
> +				.phy_sus	= { 0x0000, 8, 0, 0, 0x1d1 },
> +				.bvalid_det_en	= { 0x00c0, 1, 1, 0, 1 },
> +				.bvalid_det_st	= { 0x00c4, 1, 1, 0, 1 },
> +				.bvalid_det_clr = { 0x00c8, 1, 1, 0, 1 },
> +				.ls_det_en	= { 0x00c0, 0, 0, 0, 1 },
> +				.ls_det_st	= { 0x00c4, 0, 0, 0, 1 },
> +				.ls_det_clr	= { 0x00c8, 0, 0, 0, 1 },
> +				.disfall_en	= { 0x00c0, 6, 6, 0, 1 },
> +				.disfall_st	= { 0x00c4, 6, 6, 0, 1 },
> +				.disfall_clr	= { 0x00c8, 6, 6, 0, 1 },
> +				.disrise_en	= { 0x00c0, 5, 5, 0, 1 },
> +				.disrise_st	= { 0x00c4, 5, 5, 0, 1 },
> +				.disrise_clr	= { 0x00c8, 5, 5, 0, 1 },
> +				.utmi_avalid	= { 0x0080, 1, 1, 0, 1 },
> +				.utmi_bvalid	= { 0x0080, 0, 0, 0, 1 },
> +				.utmi_ls	= { 0x0080, 5, 4, 0, 1 },
> +			}
> +		},
> +		.chg_det = {
> +			.cp_det		= { 0x0080, 8, 8, 0, 1 },
> +			.dcp_det	= { 0x0080, 8, 8, 0, 1 },
> +			.dp_det		= { 0x0080, 9, 9, 1, 0 },
> +			.idm_sink_en	= { 0x0010, 5, 5, 1, 0 },
> +			.idp_sink_en	= { 0x0010, 5, 5, 0, 1 },
> +			.idp_src_en	= { 0x0010, 14, 14, 0, 1 },
> +			.rdm_pdwn_en	= { 0x0010, 14, 14, 0, 1 },
> +			.vdm_src_en	= { 0x0010, 7, 6, 0, 3 },
> +			.vdp_src_en	= { 0x0010, 7, 6, 0, 3 },
> +		},
> +	},
> +	{
> +		.reg = 0x2000,
> +		.num_ports	= 1,
> +		.phy_tuning	= rk3576_usb2phy_tuning,
> +		.clkout_ctl	= { 0x2008, 0, 0, 1, 0 },
> +		.port_cfgs	= {
> +			[USB2PHY_PORT_OTG] = {
> +				.phy_sus	= { 0x2000, 8, 0, 0, 0x1d1 },
> +				.bvalid_det_en	= { 0x20c0, 1, 1, 0, 1 },
> +				.bvalid_det_st	= { 0x20c4, 1, 1, 0, 1 },
> +				.bvalid_det_clr = { 0x20c8, 1, 1, 0, 1 },
> +				.ls_det_en	= { 0x20c0, 0, 0, 0, 1 },
> +				.ls_det_st	= { 0x20c4, 0, 0, 0, 1 },
> +				.ls_det_clr	= { 0x20c8, 0, 0, 0, 1 },
> +				.disfall_en	= { 0x20c0, 6, 6, 0, 1 },
> +				.disfall_st	= { 0x20c4, 6, 6, 0, 1 },
> +				.disfall_clr	= { 0x20c8, 6, 6, 0, 1 },
> +				.disrise_en	= { 0x20c0, 5, 5, 0, 1 },
> +				.disrise_st	= { 0x20c4, 5, 5, 0, 1 },
> +				.disrise_clr	= { 0x20c8, 5, 5, 0, 1 },
> +				.utmi_avalid	= { 0x2080, 1, 1, 0, 1 },
> +				.utmi_bvalid	= { 0x2080, 0, 0, 0, 1 },
> +				.utmi_ls	= { 0x2080, 5, 4, 0, 1 },
> +			}
> +		},
> +		.chg_det = {
> +			.cp_det		= { 0x2080, 8, 8, 0, 1 },
> +			.dcp_det	= { 0x2080, 8, 8, 0, 1 },
> +			.dp_det		= { 0x2080, 9, 9, 1, 0 },
> +			.idm_sink_en	= { 0x2010, 5, 5, 1, 0 },
> +			.idp_sink_en	= { 0x2010, 5, 5, 0, 1 },
> +			.idp_src_en	= { 0x2010, 14, 14, 0, 1 },
> +			.rdm_pdwn_en	= { 0x2010, 14, 14, 0, 1 },
> +			.vdm_src_en	= { 0x2010, 7, 6, 0, 3 },
> +			.vdp_src_en	= { 0x2010, 7, 6, 0, 3 },
> +		},
> +	},
> +	{ /* sentinel */ }
> +};
> +
>  static const struct rockchip_usb2phy_cfg rk3588_phy_cfgs[] = {
>  	{
>  		.reg = 0x0000,
> @@ -2109,6 +2211,7 @@ static const struct of_device_id rockchip_usb2phy_dt_match[] = {
>  	{ .compatible = "rockchip,rk3366-usb2phy", .data = &rk3366_phy_cfgs },
>  	{ .compatible = "rockchip,rk3399-usb2phy", .data = &rk3399_phy_cfgs },
>  	{ .compatible = "rockchip,rk3568-usb2phy", .data = &rk3568_phy_cfgs },
> +	{ .compatible = "rockchip,rk3576-usb2phy", .data = &rk3576_phy_cfgs },
>  	{ .compatible = "rockchip,rk3588-usb2phy", .data = &rk3588_phy_cfgs },
>  	{ .compatible = "rockchip,rv1108-usb2phy", .data = &rv1108_phy_cfgs },
>  	{}
> 