[PATCH v2 1/3] phy: rockchip-pcie: Simplify error handling with dev_err_probe()

[Anand Moon]

Use the dev_err_probe() helper to simplify error handling during probe.
This also handle scenario, when -EDEFER is returned and useless error
is printed.

Signed-off-by: Anand Moon <linux.amoon at gmail.com>
---
v2: None
v1: None
---
 drivers/phy/rockchip/phy-rockchip-pcie.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-pcie.c b/drivers/phy/rockchip/phy-rockchip-pcie.c
index 51cc5ece0e63..51e636a1ce33 100644
--- a/drivers/phy/rockchip/phy-rockchip-pcie.c
+++ b/drivers/phy/rockchip/phy-rockchip-pcie.c
@@ -371,12 +371,9 @@ static int rockchip_pcie_phy_probe(struct platform_device *pdev)
 	mutex_init(&rk_phy->pcie_mutex);
 
 	rk_phy->phy_rst = devm_reset_control_get(dev, "phy");
-	if (IS_ERR(rk_phy->phy_rst)) {
-		if (PTR_ERR(rk_phy->phy_rst) != -EPROBE_DEFER)
-			dev_err(dev,
-				"missing phy property for reset controller\n");
-		return PTR_ERR(rk_phy->phy_rst);
-	}
+	if (IS_ERR(rk_phy->phy_rst))
+		return dev_err_probe(&pdev->dev, PTR_ERR(rk_phy->phy_rst),
+				     "missing phy property for reset controller\n");
 
 	rk_phy->clk_pciephy_ref = devm_clk_get(dev, "refclk");
 	if (IS_ERR(rk_phy->clk_pciephy_ref)) {
-- 
2.44.0