[PATCH v2 1/2] phy: usb: Fix missing elements in BCM4908 USB init array

[Justin Chen]

On 10/3/24 8:41 PM, Sam Edwards wrote:
> The Broadcom USB PHY driver contains a lookup table
> (`reg_bits_map_tables`) to resolve register bitmaps unique to certain
> versions of the USB PHY as found in various Broadcom chip families. A
> recent commit (see 'fixes' tag) introduced two new elements to each chip
> family in this table -- except for one: BCM4908. This resulted in the
> xHCI controller not being initialized correctly, causing a panic on
> boot.
> 
> The next patch will update this table to use designated initializers in
> order to prevent this from happening again. For now, just add back the
> missing array elements to resolve the regression.
> 
> Fixes: 4536fe9640b6 ("phy: usb: suppress OC condition for 7439b2")
> Signed-off-by: Sam Edwards <CFSworks at gmail.com>

Woops! Sorry I broke it.

Reviewed-by: Justin Chen <justin.chen at broadcom.com>

> ---
>   drivers/phy/broadcom/phy-brcm-usb-init.c | 2 ++
>   1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/phy/broadcom/phy-brcm-usb-init.c b/drivers/phy/broadcom/phy-brcm-usb-init.c
> index 39536b6d96a9..5ebb3a616115 100644
> --- a/drivers/phy/broadcom/phy-brcm-usb-init.c
> +++ b/drivers/phy/broadcom/phy-brcm-usb-init.c
> @@ -220,6 +220,8 @@ usb_reg_bits_map_table[BRCM_FAMILY_COUNT][USB_CTRL_SELECTOR_COUNT] = {
>   		0, /* USB_CTRL_SETUP_SCB2_EN_MASK */
>   		0, /* USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK */
>   		0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */
> +		0, /* USB_CTRL_SETUP_OC3_DISABLE_PORT0_MASK */
> +		0, /* USB_CTRL_SETUP_OC3_DISABLE_PORT1_MASK */
>   		0, /* USB_CTRL_SETUP_OC3_DISABLE_MASK */
>   		0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */
>   		0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */