[PATCH 3/9] dt-bindings: phy: samsung,usb3-drd-phy: gs101: require Type-C properties

[André Draszik]

Hi Conor,

On Wed, 2024-11-27 at 16:00 +0000, Conor Dooley wrote:
> On Wed, Nov 27, 2024 at 10:58:13AM +0000, André Draszik wrote:
> > The USB PHY on gs101 needs to be configured based on the orientation of
> > the connector. For that the DTS needs a link between the phy's port and
> > a TCPCi, and we'll need to inform the phy driver that it should handle
> > the orientation (register a handler).
> > 
> > Update the schema to enforce that by requiring the orientation-switch
> > and port properties (on gs101 only).
> > 
> > Signed-off-by: André Draszik <andre.draszik at linaro.org>
> 
> What is your driver doing if these are not provided? New required
> properties are an ABI break after all and I don't see a mention of how
> you're handling it here.

This is hooked-in in patch 8 of this series in
exynos5_usbdrd_setup_notifiers(). The new behaviour is gated off

    if (device_property_present(phy_drd->dev, "orientation-switch")) {
        ...

Without that property (i.e. old DTS or !gs101), the driver will behave as
before (meaning for gs101 it will work in SS mode in one orientation only).

Does that address your concern?

Cheers,
Andre'