[PATCH v2 07/15] dt-bindings: phy: renesas,usb2-phy: Mark resets as required for RZ/G3S

[Claudiu]

From: Claudiu Beznea <claudiu.beznea.uj at bp.renesas.com>

The reset lines are mandatory for the Renesas RZ/G3S platform and must be
explicitly defined in device tree.

Fixes: f3c849855114 ("dt-bindings: phy: renesas,usb2-phy: Document RZ/G3S phy bindings")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj at bp.renesas.com>
---

Changes in v2:
- none; this patch is new


 Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
index af275cea3456..2babd200bd98 100644
--- a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
@@ -105,7 +105,9 @@ allOf:
       properties:
         compatible:
           contains:
-            const: renesas,rzg2l-usb2-phy
+            enum:
+              - renesas,rzg2l-usb2-phy
+              - renesas,usb2-phy-r9a08g045
     then:
       required:
         - resets
-- 
2.39.2