[PATCH v3 6/6] arm64: dts: qcom: Add USB controller and phy nodes for IPQ5424
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Thu Nov 14 05:28:36 PST 2024
On Thu, 14 Nov 2024 at 09:48, Varadarajan Narayanan
<quic_varada at quicinc.com> wrote:
>
> The IPQ5424 SoC has both USB2.0 and USB3.0 controllers. The USB3.0
> can connect to either of USB2.0 or USB3.0 phy and operate in the
> respective mode.
>
> Signed-off-by: Varadarajan Narayanan <quic_varada at quicinc.com>
> ---
> v3: Regulator node names, labels and 'regulator-name' changed per review suggestions
> Stray newline removed
>
> v2: Add dm/dp_hs_phy_irq to usb3 at 8a00000 node
> Add u1/u2-entry quirks to usb at 8a00000 node
> ---
> arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts | 66 ++++++++
> arch/arm64/boot/dts/qcom/ipq5424.dtsi | 159 ++++++++++++++++++++
> 2 files changed, 225 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts b/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts
> index d4d31026a026..859e15befb3f 100644
> --- a/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts
> +++ b/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts
> @@ -16,12 +16,70 @@ / {
> aliases {
> serial0 = &uart1;
> };
> +
> + vreg_misc_3p3: regulator-3300000 {
Technically these names are correct. However they don't match the
approach that Qualcomm DT files have been using up to now.
You can compare your data with the output of `git grep :.regulator-
arch/arm64/boot/dts/qcom/`
> + compatible = "regulator-fixed";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-name = "usb_hs_vdda_3p3";
> + };
> +
> + vreg_misc_1p8: regulator-1800000 {
> + compatible = "regulator-fixed";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-name = "vdda_1p8_usb";
> + };
> +
> + vreg_misc_0p925: regulator-0925000 {
> + compatible = "regulator-fixed";
> + regulator-min-microvolt = <925000>;
> + regulator-max-microvolt = <925000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-name = "vdd_core_usb";
> + };
> +};
> +
> +&dwc_0 {
> + dr_mode = "host";
> +};
> +
> +&dwc_1 {
> + dr_mode = "host";
> +};
> +
> +&qusb_phy_0 {
> + vdd-supply = <&vreg_misc_0p925>;
> + vdda-pll-supply = <&vreg_misc_1p8>;
> + vdda-phy-dpdm-supply = <&vreg_misc_3p3>;
> +
> + status = "okay";
> +};
> +
> +&qusb_phy_1 {
> + vdd-supply = <&vreg_misc_0p925>;
> + vdda-pll-supply = <&vreg_misc_1p8>;
> + vdda-phy-dpdm-supply = <&vreg_misc_3p3>;
> +
> + status = "okay";
> };
>
> &sleep_clk {
> clock-frequency = <32000>;
> };
>
> +&ssphy_0 {
> + vdda-pll-supply = <&vreg_misc_1p8>;
> + vdda-phy-supply = <&vreg_misc_0p925>;
> +
> + status = "okay";
> +};
> +
> &tlmm {
> sdc_default_state: sdc-default-state {
> clk-pins {
> @@ -53,6 +111,14 @@ &uart1 {
> status = "okay";
> };
>
> +&usb2 {
> + status = "okay";
> +};
> +
> +&usb3 {
> + status = "okay";
> +};
> +
> &xo_board {
> clock-frequency = <24000000>;
> };
> diff --git a/arch/arm64/boot/dts/qcom/ipq5424.dtsi b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
> index 5e219f900412..f8afd6f0412d 100644
> --- a/arch/arm64/boot/dts/qcom/ipq5424.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
> @@ -233,6 +233,165 @@ intc: interrupt-controller at f200000 {
> msi-controller;
> };
>
> + qusb_phy_1: phy at 71000 {
> + compatible = "qcom,ipq5424-qusb2-phy";
> + reg = <0 0x00071000 0 0x180>;
> + #phy-cells = <0>;
> +
> + clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
> + <&xo_board>;
> + clock-names = "cfg_ahb", "ref";
> +
> + resets = <&gcc GCC_QUSB2_1_PHY_BCR>;
> + status = "disabled";
> + };
> +
> + usb2: usb2 at 1e00000 {
> + compatible = "qcom,ipq5424-dwc3", "qcom,dwc3";
> + reg = <0 0x01ef8800 0 0x400>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + clocks = <&gcc GCC_USB1_MASTER_CLK>,
> + <&gcc GCC_USB1_SLEEP_CLK>,
> + <&gcc GCC_USB1_MOCK_UTMI_CLK>,
> + <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
> + <&gcc GCC_CNOC_USB_CLK>;
> +
> + clock-names = "core",
> + "sleep",
> + "mock_utmi",
> + "iface",
> + "cfg_noc";
> +
> + assigned-clocks = <&gcc GCC_USB1_MASTER_CLK>,
> + <&gcc GCC_USB1_MOCK_UTMI_CLK>;
> + assigned-clock-rates = <200000000>,
> + <24000000>;
> +
> + interrupts-extended = <&intc GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
> + <&intc GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
> + <&intc GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>,
> + <&intc GIC_SPI 388 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "pwr_event",
> + "qusb2_phy",
> + "dm_hs_phy_irq",
> + "dp_hs_phy_irq";
> +
> + resets = <&gcc GCC_USB1_BCR>;
> + qcom,select-utmi-as-pipe-clk;
> + status = "disabled";
> +
> + dwc_1: usb at 1e00000 {
> + compatible = "snps,dwc3";
> + reg = <0 0x01e00000 0 0xe000>;
> + clocks = <&gcc GCC_USB1_MOCK_UTMI_CLK>;
> + clock-names = "ref";
> + interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
> + phys = <&qusb_phy_1>;
> + phy-names = "usb2-phy";
> + tx-fifo-resize;
> + snps,is-utmi-l1-suspend;
> + snps,hird-threshold = /bits/ 8 <0x0>;
> + snps,dis_u2_susphy_quirk;
> + snps,dis_u3_susphy_quirk;
> + };
> + };
> +
> + qusb_phy_0: phy at 7b000 {
> + compatible = "qcom,ipq5424-qusb2-phy";
> + reg = <0 0x0007b000 0 0x180>;
> + #phy-cells = <0>;
> +
> + clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
> + <&xo_board>;
> + clock-names = "cfg_ahb", "ref";
> +
> + resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
> + status = "disabled";
> + };
> +
> + ssphy_0: phy at 7d000 {
> + compatible = "qcom,ipq5424-qmp-usb3-phy";
> + reg = <0 0x0007d000 0 0xa00>;
> + #phy-cells = <0>;
> +
> + clocks = <&gcc GCC_USB0_AUX_CLK>,
> + <&xo_board>,
> + <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
> + <&gcc GCC_USB0_PIPE_CLK>;
> + clock-names = "aux",
> + "ref",
> + "cfg_ahb",
> + "pipe";
> +
> + resets = <&gcc GCC_USB0_PHY_BCR>,
> + <&gcc GCC_USB3PHY_0_PHY_BCR>;
> + reset-names = "phy",
> + "phy_phy";
> +
> + #clock-cells = <0>;
> + clock-output-names = "usb0_pipe_clk";
> +
> + status = "disabled";
> + };
> +
> + usb3: usb3 at 8a00000 {
> + compatible = "qcom,ipq5424-dwc3", "qcom,dwc3";
> + reg = <0 0x08af8800 0 0x400>;
> +
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + clocks = <&gcc GCC_USB0_MASTER_CLK>,
> + <&gcc GCC_USB0_SLEEP_CLK>,
> + <&gcc GCC_USB0_MOCK_UTMI_CLK>,
> + <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
> + <&gcc GCC_CNOC_USB_CLK>;
> +
> + clock-names = "core",
> + "sleep",
> + "mock_utmi",
> + "iface",
> + "cfg_noc";
> +
> + assigned-clocks = <&gcc GCC_USB0_MASTER_CLK>,
> + <&gcc GCC_USB0_MOCK_UTMI_CLK>;
> + assigned-clock-rates = <200000000>,
> + <24000000>;
> +
> + interrupts-extended = <&intc GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
> + <&intc GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
> + <&intc GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
> + <&intc GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "pwr_event",
> + "qusb2_phy",
> + "dm_hs_phy_irq",
> + "dp_hs_phy_irq";
> +
> + resets = <&gcc GCC_USB_BCR>;
> + status = "disabled";
> +
> + dwc_0: usb at 8a00000 {
> + compatible = "snps,dwc3";
> + reg = <0 0x08a00000 0 0xcd00>;
> + clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
> + clock-names = "ref";
> + interrupts = <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>;
> + phys = <&qusb_phy_0>, <&ssphy_0>;
> + phy-names = "usb2-phy", "usb3-phy";
> + tx-fifo-resize;
> + snps,is-utmi-l1-suspend;
> + snps,hird-threshold = /bits/ 8 <0x0>;
> + snps,dis_u2_susphy_quirk;
> + snps,dis_u3_susphy_quirk;
> + snps,dis-u1-entry-quirk;
> + snps,dis-u2-entry-quirk;
> + };
> + };
> +
> timer at f420000 {
> compatible = "arm,armv7-timer-mem";
> reg = <0 0xf420000 0 0x1000>;
> --
> 2.34.1
>
--
With best wishes
Dmitry
More information about the linux-phy
mailing list