[PATCH v1 2/6] phy: qcom-qusb2: add QUSB2 support for IPQ5424

[Dmitry Baryshkov]

On Tue, Nov 12, 2024 at 02:43:51PM +0530, Varadarajan Narayanan wrote:
> Add the phy init sequence for the Super Speed ports found
> on IPQ5424.
> 
> Signed-off-by: Varadarajan Narayanan <quic_varada at quicinc.com>
> ---
>  drivers/phy/qualcomm/phy-qcom-qusb2.c | 28 +++++++++++++++++++++++++++
>  1 file changed, 28 insertions(+)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
> index c52655a383ce..4513f0c81c50 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
> @@ -151,6 +151,21 @@ static const struct qusb2_phy_init_tbl ipq6018_init_tbl[] = {
>  	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_AUTOPGM_CTL1, 0x9F),
>  };
>  
> +static const struct qusb2_phy_init_tbl ipq5424_init_tbl[] = {
> +	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL, 0x14),
> +	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0x00),
> +	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0x53),
> +	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0xC3),
> +	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TUNE, 0x30),
> +	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL1, 0x79),
> +	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL2, 0x21),
> +	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE5, 0x00),
> +	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_PWR_CTRL, 0x00),
> +	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TEST2, 0x14),
> +	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TEST, 0x80),
> +	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_AUTOPGM_CTL1, 0x9F),

Lowercase hex numbers please. LGTM otherwise.

> +};
> +
>  static const unsigned int ipq6018_regs_layout[] = {
>  	[QUSB2PHY_PLL_STATUS]              = 0x38,
>  	[QUSB2PHY_PORT_TUNE1]              = 0x80,
> @@ -331,6 +346,16 @@ static const struct qusb2_phy_cfg ipq6018_phy_cfg = {
>  	.autoresume_en   = BIT(0),
>  };
>  
> +static const struct qusb2_phy_cfg ipq5424_phy_cfg = {
> +	.tbl            = ipq5424_init_tbl,
> +	.tbl_num        = ARRAY_SIZE(ipq5424_init_tbl),
> +	.regs           = ipq6018_regs_layout,
> +
> +	.disable_ctrl   = POWER_DOWN,
> +	.mask_core_ready = PLL_LOCKED,
> +	.autoresume_en   = BIT(0),
> +};
> +
>  static const struct qusb2_phy_cfg qusb2_v2_phy_cfg = {
>  	.tbl		= qusb2_v2_init_tbl,
>  	.tbl_num	= ARRAY_SIZE(qusb2_v2_init_tbl),
> @@ -905,6 +930,9 @@ static const struct phy_ops qusb2_phy_gen_ops = {
>  
>  static const struct of_device_id qusb2_phy_of_match_table[] = {
>  	{
> +		.compatible	= "qcom,ipq5424-qusb2-phy",
> +		.data		= &ipq5424_phy_cfg,
> +	}, {
>  		.compatible	= "qcom,ipq6018-qusb2-phy",
>  		.data		= &ipq6018_phy_cfg,
>  	}, {
> -- 
> 2.34.1
> 

-- 
With best wishes
Dmitry