[PATCH 00/14] arm64: dts: allwinner: Add basic Allwinner A523 support
Andre Przywara
andre.przywara at arm.com
Mon Nov 11 09:42:25 PST 2024
On Mon, 11 Nov 2024 09:32:53 -0600
"Rob Herring (Arm)" <robh at kernel.org> wrote:
Hi Rob,
> On Mon, 11 Nov 2024 01:30:19 +0000, Andre Przywara wrote:
> > Hi,
> >
> > this series adds basic DT support for the Allwinner A523 SoC, plus the
> > Avaota-A1 router board using the T527 package variant of that SoC.[1]
> > Functionality-wise it relies on the pinctrl[2] and clock[3] support
> > series, though there is no direct code dependency series to this series
> > (apart from the respective binding patches in the two series').
> >
> > Most of the patches add DT binding documentation for the most basic
> > peripherals, the vast majority of them actually being already supported,
> > courtesy of identical IP being used. This includes MMC and USB 2.0, so
> > with the above mentioned clock and pinctrl support this gives an already
> > somewhat usable mainline support for this new SoC family.
> > The watchdog is not completely compatible, but is an easy addition, so
> > this bit is included in here as well.
> >
> > The A523 features 8 Arm Cortex-A55 cores, organised in two clusters,
> > clocked separately, with different OPP limits, in some kind of
> > little/LITTLE configuration. The GPU is a Arm Mali G57 MC01, and the chip
> > also features a single PCIe 2.1 lane, sharing a PHY with some USB 3.1
> > controller - which means only one of the two can be used.
> > The rest of the SoC is the usual soup of multimedia SoC IP, with eDP
> > support and two Gigabit Ethernet MACs among the highlights.
> >
> > The main feature is patch 11/14, which adds the SoC .dtsi. This for now
> > is limited to the parts that are supported and could be tested. At the
> > moment there is no PSCI firmware, even the TF-A port from the BSP does
> > not seem to work for me. That's why the secondary cores have been omitted
> > for now, among other instances of some IP that I couldn't test yet.
> > I plan to add them in one of the next revisions.
> >
> > The last patch adds basic support for the Avaota-A1 router board,
> > designed by YuzukiHD, with some boards now built by Pine64.
> >
> > The mainline firmware side in general is somewhat lacking still: I have
> > basic U-Boot support working (including MMC and USB), although still
> > without DRAM support. This is for now covered by some binary blob found
> > in the (otherwise Open Source) Syterkit firmware, which also provides
> > the BSP versions of TF-A and the required (RISC-V) management core
> > firmware. Fortunately we have indications that DRAM support is not that
> > tricky, as the IP blocks are very similar to already supported, and dev
> > boards are on their way to the right people.
> >
> > Meanwhile I would like people to have a look at those DT bits here. Please
> > compare them to the available user manual, and test them if you have access
> > to hardware.
> >
> > Based on v6.12-rc1.
> > I pushed a branch with all the three series combined here:
> > https://github.com/apritzel/linux/commits/a523-v1/
> >
> > Cheers,
> > Andre
> >
> > [1] https://linux-sunxi.org/A523#Family_of_sun55iw3
> > [2] https://lore.kernel.org/linux-sunxi/20241111005750.13071-1-andre.przywara@arm.com/T/#t
> > [3] https://lore.kernel.org/linux-sunxi/20241111004722.10130-1-andre.przywara@arm.com/T/#t
> >
> > Andre Przywara (14):
> > dt-bindings: mmc: sunxi: Simplify compatible string listing
> > dt-bindings: mmc: sunxi: add compatible strings for Allwinner A523
> > dt-bindings: watchdog: sunxi: add Allwinner A523 compatible string
> > watchdog: sunxi_wdt: Add support for Allwinner A523
> > dt-bindings: i2c: mv64xxx: Add Allwinner A523 compatible string
> > dt-bindings: irq: sun7i-nmi: document the Allwinner A523 NMI
> > controller
> > dt-bindings: phy: document Allwinner A523 USB-2.0 PHY
> > dt-bindings: usb: sunxi-musb: add Allwinner A523 compatible string
> > dt-bindings: usb: add A523 compatible string for EHCI and OCHI
> > dt-bindings: rtc: sun6i: Add Allwinner A523 support
> > arm64: dts: allwinner: Add Allwinner A523 .dtsi file
> > dt-bindings: vendor-prefixes: Add YuzukiHD name
> > dt-bindings: arm: sunxi: Add Avaota A1 board
> > arm64: dts: allwinner: a523: add Avaota-A1 router support
> >
> > .../devicetree/bindings/arm/sunxi.yaml | 5 +
> > .../bindings/i2c/marvell,mv64xxx-i2c.yaml | 1 +
> > .../allwinner,sun7i-a20-sc-nmi.yaml | 1 +
> > .../bindings/mmc/allwinner,sun4i-a10-mmc.yaml | 40 +-
> > .../phy/allwinner,sun50i-a64-usb-phy.yaml | 10 +-
> > .../bindings/rtc/allwinner,sun6i-a31-rtc.yaml | 4 +-
> > .../usb/allwinner,sun4i-a10-musb.yaml | 1 +
> > .../devicetree/bindings/usb/generic-ehci.yaml | 1 +
> > .../devicetree/bindings/usb/generic-ohci.yaml | 1 +
> > .../devicetree/bindings/vendor-prefixes.yaml | 2 +
> > .../watchdog/allwinner,sun4i-a10-wdt.yaml | 2 +
> > arch/arm64/boot/dts/allwinner/Makefile | 1 +
> > .../arm64/boot/dts/allwinner/sun55i-a523.dtsi | 386 ++++++++++++++++++
> > .../dts/allwinner/sun55i-t527-avaota-a1.dts | 311 ++++++++++++++
> > drivers/watchdog/sunxi_wdt.c | 11 +
> > 15 files changed, 751 insertions(+), 26 deletions(-)
> > create mode 100644 arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
> > create mode 100644 arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dts
> >
> > --
> > 2.46.2
> >
> >
> >
>
>
> My bot found new DTB warnings on the .dts files added or changed in this
> series.
>
> Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
> are fixed by another series. Ultimately, it is up to the platform
> maintainer whether these warnings are acceptable or not. No need to reply
> unless the platform maintainer has comments.
>
> If you already ran DT checks and didn't see these error(s), then
> make sure dt-schema is up to date:
>
> pip3 install dtschema --upgrade
>
>
> New warnings running 'make CHECK_DTBS=y allwinner/sun55i-t527-avaota-a1.dtb' for 20241111013033.22793-1-andre.przywara at arm.com:
>
> In file included from arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dts:6:
> arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi:6:10: fatal error: dt-bindings/clock/sun55i-a523-ccu.h: No such file or directory
> 6 | #include <dt-bindings/clock/sun55i-a523-ccu.h>
Argh, the headers, forgot about them! I was hoping there would only be a
complaint about the undocumented compatible strings, and I didn't want to
tie the three series together unnecessarily, to avoid a harder to handle
28-patch series.
I hope this doesn't prevent actual review by people, my github has
the combined story, in case people want to avoid the issue:
https://github.com/apritzel/linux/commits/a523-v1/
Cheers,
Andre
> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> compilation terminated.
> make[3]: *** [scripts/Makefile.dtbs:129: arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dtb] Error 1
> make[2]: *** [scripts/Makefile.build:478: arch/arm64/boot/dts/allwinner] Error 2
> make[2]: Target 'arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dtb' not remade because of errors.
> make[1]: *** [/home/rob/proj/linux-dt-testing/Makefile:1399: allwinner/sun55i-t527-avaota-a1.dtb] Error 2
> make: *** [Makefile:224: __sub-make] Error 2
> make: Target 'allwinner/sun55i-t527-avaota-a1.dtb' not remade because of errors.
>
>
>
>
>
More information about the linux-phy
mailing list