[PATCH 2/2] phy: qcom: qmp-pcie: Add X1E80100 Gen4 4-lane mode support

[Abel Vesa]

The PCIe 6th instance from X1E80100 can be used in both 4-lane mode or
2-lane mode. Add the configuration and compatible for the 4-lane mode.

Signed-off-by: Abel Vesa <abel.vesa at linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 42 ++++++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index 6c796723c8f5..4e0b28da69a7 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -1028,6 +1028,10 @@ static const struct qmp_phy_init_tbl x1e80100_qmp_gen4x2_pcie_ln_shrd_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH6_RATE3, 0x1f),
 };
 
+static const struct qmp_phy_init_tbl x1e80100_qmp_gen4x4_pcie_serdes_4ln_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_BIAS_EN_CLK_BUFLR_EN, 0x1c),
+};
+
 static const struct qmp_phy_init_tbl x1e80100_qmp_gen4x2_pcie_tx_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_V6_20_TX_RES_CODE_LANE_OFFSET_TX, 0x1d),
 	QMP_PHY_INIT_CFG(QSERDES_V6_20_TX_RES_CODE_LANE_OFFSET_RX, 0x03),
@@ -3342,6 +3346,41 @@ static const struct qmp_phy_cfg x1e80100_qmp_gen4x2_pciephy_cfg = {
 		.ln_shrd		= x1e80100_qmp_gen4x2_pcie_ln_shrd_tbl,
 		.ln_shrd_num		= ARRAY_SIZE(x1e80100_qmp_gen4x2_pcie_ln_shrd_tbl),
 	},
+
+	.reset_list		= sdm845_pciephy_reset_l,
+	.num_resets		= ARRAY_SIZE(sdm845_pciephy_reset_l),
+	.vreg_list		= sm8550_qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(sm8550_qmp_phy_vreg_l),
+	.regs			= pciephy_v6_regs_layout,
+
+	.pwrdn_ctrl		= SW_PWRDN | REFCLK_DRV_DSBL,
+	.phy_status		= PHYSTATUS_4_20,
+	.has_nocsr_reset	= true,
+};
+
+static const struct qmp_phy_cfg x1e80100_qmp_gen4x4_pciephy_cfg = {
+	.lanes = 4,
+
+	.offsets		= &qmp_pcie_offsets_v6_20,
+
+	.tbls = {
+		.serdes			= x1e80100_qmp_gen4x2_pcie_serdes_tbl,
+		.serdes_num		= ARRAY_SIZE(x1e80100_qmp_gen4x2_pcie_serdes_tbl),
+		.tx			= x1e80100_qmp_gen4x2_pcie_tx_tbl,
+		.tx_num			= ARRAY_SIZE(x1e80100_qmp_gen4x2_pcie_tx_tbl),
+		.rx			= x1e80100_qmp_gen4x2_pcie_rx_tbl,
+		.rx_num			= ARRAY_SIZE(x1e80100_qmp_gen4x2_pcie_rx_tbl),
+		.pcs			= x1e80100_qmp_gen4x2_pcie_pcs_tbl,
+		.pcs_num		= ARRAY_SIZE(x1e80100_qmp_gen4x2_pcie_pcs_tbl),
+		.pcs_misc		= x1e80100_qmp_gen4x2_pcie_pcs_misc_tbl,
+		.pcs_misc_num		= ARRAY_SIZE(x1e80100_qmp_gen4x2_pcie_pcs_misc_tbl),
+		.ln_shrd		= x1e80100_qmp_gen4x2_pcie_ln_shrd_tbl,
+		.ln_shrd_num		= ARRAY_SIZE(x1e80100_qmp_gen4x2_pcie_ln_shrd_tbl),
+	},
+
+	.serdes_4ln_tbl		= x1e80100_qmp_gen4x4_pcie_serdes_4ln_tbl,
+	.serdes_4ln_num		= ARRAY_SIZE(x1e80100_qmp_gen4x4_pcie_serdes_4ln_tbl),
+
 	.reset_list		= sdm845_pciephy_reset_l,
 	.num_resets		= ARRAY_SIZE(sdm845_pciephy_reset_l),
 	.vreg_list		= sm8550_qmp_phy_vreg_l,
@@ -4108,6 +4147,9 @@ static const struct of_device_id qmp_pcie_of_match_table[] = {
 	}, {
 		.compatible = "qcom,x1e80100-qmp-gen4x2-pcie-phy",
 		.data = &x1e80100_qmp_gen4x2_pciephy_cfg,
+	}, {
+		.compatible = "qcom,x1e80100-qmp-gen4x4-pcie-phy",
+		.data = &x1e80100_qmp_gen4x4_pciephy_cfg,
 	},
 	{ },
 };

-- 
2.34.1