[PATCH v2 4/7] phy: qcom: qmp-combo: register a typec mux to change the QPHY_MODE

[Dmitry Baryshkov]

On Mon, May 27, 2024 at 10:42:36AM +0200, Neil Armstrong wrote:
> Register a typec mux in order to change the PHY mode on the Type-C
> mux events depending on the mode and the svid when in Altmode setup.
> 
> The DisplayPort phy should be left enabled if is still powered on
> by the DRM DisplayPort controller, so bail out until the DisplayPort
> PHY is not powered off.
> 
> The Type-C Mode/SVID only changes on plug/unplug, and USB SAFE states
> will be set in between of USB-Only, Combo and DisplayPort Only so
> this will leave enough time to the DRM DisplayPort controller to
> turn of the DisplayPort PHY.
> 
> Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
> ---
>  drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 123 ++++++++++++++++++++++++++++--
>  1 file changed, 118 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> index 788e4c05eaf2..b55ab08d44c2 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> @@ -19,6 +19,7 @@
>  #include <linux/reset.h>
>  #include <linux/slab.h>
>  #include <linux/usb/typec.h>
> +#include <linux/usb/typec_dp.h>
>  #include <linux/usb/typec_mux.h>
>  
>  #include <drm/bridge/aux-bridge.h>
> @@ -1527,6 +1528,10 @@ struct qmp_combo {
>  
>  	struct typec_switch_dev *sw;
>  	enum typec_orientation orientation;
> +
> +	struct typec_mux_dev *mux;
> +	unsigned long mux_mode;
> +	unsigned int svid;
>  };
>  
>  static void qmp_v3_dp_aux_init(struct qmp_combo *qmp);
> @@ -3353,17 +3358,112 @@ static int qmp_combo_typec_switch_set(struct typec_switch_dev *sw,
>  	return 0;
>  }
>  
> -static void qmp_combo_typec_unregister(void *data)
> +static int qmp_combo_typec_mux_set(struct typec_mux_dev *mux, struct typec_mux_state *state)
> +{
> +	struct qmp_combo *qmp = typec_mux_get_drvdata(mux);
> +	const struct qmp_phy_cfg *cfg = qmp->cfg;
> +	enum qphy_mode new_mode;
> +	unsigned int svid;
> +
> +	if (state->mode == qmp->mode)
> +		return 0;
> +
> +	mutex_lock(&qmp->phy_mutex);
> +
> +	if (state->alt)
> +		svid = state->alt->svid;
> +	else
> +		svid = 0; // No SVID
> +
> +	if (svid == USB_TYPEC_DP_SID) {
> +		switch (state->mode) {
> +		/* DP Only */
> +		case TYPEC_DP_STATE_C:
> +		case TYPEC_DP_STATE_E:
> +			new_mode = QPHY_MODE_DP_ONLY;
> +			break;
> +
> +		/* DP + USB */
> +		case TYPEC_DP_STATE_D:
> +		case TYPEC_DP_STATE_F:
> +
> +		/* Safe fallback...*/
> +		default:
> +			new_mode = QPHY_MODE_COMBO;
> +			break;
> +		}
> +	} else {
> +		/* Only switch to USB_ONLY when we know we only have USB3 */
> +		if (qmp->mux_mode == TYPEC_MODE_USB3)
> +			new_mode = QPHY_MODE_USB_ONLY;
> +		else
> +			new_mode = QPHY_MODE_COMBO;
> +	}
> +
> +	if (new_mode == qmp->init_mode) {
> +		dev_dbg(qmp->dev, "typec_mux_set: same phy mode, bail out\n");
> +		qmp->mode = state->mode;
> +		goto out;
> +	}
> +
> +	if (qmp->init_mode != QPHY_MODE_USB_ONLY && qmp->dp_powered_on) {
> +		dev_dbg(qmp->dev, "typec_mux_set: DP is still powered on, delaying switch\n");
> +		goto out;
> +	}
> +
> +	dev_dbg(qmp->dev, "typec_mux_set: switching from phy mode %d to %d\n",
> +		qmp->init_mode, new_mode);
> +
> +	qmp->mux_mode = state->mode;
> +	qmp->init_mode = new_mode;
> +
> +	if (qmp->init_count) {
> +		if (qmp->usb_init_count)
> +			qmp_combo_usb_power_off(qmp->usb_phy);
> +		if (qmp->dp_init_count)
> +			writel(DP_PHY_PD_CTL_PSR_PWRDN, qmp->dp_dp_phy + QSERDES_DP_PHY_PD_CTL);
> +		qmp_combo_com_exit(qmp, true);
> +
> +		/* Now everything's powered down, power up the right PHYs */
> +
> +		qmp_combo_com_init(qmp, true);
> +		if (qmp->init_mode == QPHY_MODE_DP_ONLY && qmp->usb_init_count) {
> +			qmp->usb_init_count--;

Can we move this clause next to actually powering USB part off?

> +		} else if (qmp->init_mode != QPHY_MODE_DP_ONLY) {
> +			qmp_combo_usb_power_on(qmp->usb_phy);
> +			if (!qmp->usb_init_count)
> +				qmp->usb_init_count++;
> +		}
> +		if (qmp->init_mode != QPHY_MODE_USB_ONLY && qmp->dp_init_count)
> +			cfg->dp_aux_init(qmp);

Does dp_init_count reflect the actual necessity to bring up the DP part
up? Maybe we can unify the code between this function and
qmp_combo_typec_switch_set()? I don't like that it is unobvious whether
these two functions will results in the same state or not depending on
the order in which they are being called.

> +	}
> +
> +out:
> +	mutex_unlock(&qmp->phy_mutex);
> +
> +	return 0;
> +}
> +
> +static void qmp_combo_typec_switch_unregister(void *data)
>  {
>  	struct qmp_combo *qmp = data;
>  
>  	typec_switch_unregister(qmp->sw);
>  }
>  
> -static int qmp_combo_typec_switch_register(struct qmp_combo *qmp)
> +static void qmp_combo_typec_mux_unregister(void *data)
> +{
> +	struct qmp_combo *qmp = data;
> +
> +	typec_mux_unregister(qmp->mux);
> +}
> +
> +static int qmp_combo_typec_register(struct qmp_combo *qmp)
>  {
>  	struct typec_switch_desc sw_desc = {};
> +	struct typec_mux_desc mux_desc = { };
>  	struct device *dev = qmp->dev;
> +	int ret;
>  
>  	sw_desc.drvdata = qmp;
>  	sw_desc.fwnode = dev->fwnode;
> @@ -3374,10 +3474,23 @@ static int qmp_combo_typec_switch_register(struct qmp_combo *qmp)
>  		return PTR_ERR(qmp->sw);
>  	}
>  
> -	return devm_add_action_or_reset(dev, qmp_combo_typec_unregister, qmp);
> +	ret = devm_add_action_or_reset(dev, qmp_combo_typec_switch_unregister, qmp);
> +	if (ret)
> +		return ret;
> +
> +	mux_desc.drvdata = qmp;
> +	mux_desc.fwnode = dev->fwnode;
> +	mux_desc.set = qmp_combo_typec_mux_set;
> +	qmp->mux = typec_mux_register(dev, &mux_desc);
> +	if (IS_ERR(qmp->mux)) {
> +		dev_err(dev, "Unable to register typec mux: %pe\n", qmp->mux);
> +		return PTR_ERR(qmp->mux);
> +	}
> +
> +	return devm_add_action_or_reset(dev, qmp_combo_typec_mux_unregister, qmp);
>  }
>  #else
> -static int qmp_combo_typec_switch_register(struct qmp_combo *qmp)
> +static int qmp_combo_typec_register(struct qmp_combo *qmp)
>  {
>  	return 0;
>  }
> @@ -3609,7 +3722,7 @@ static int qmp_combo_probe(struct platform_device *pdev)
>  	if (ret)
>  		goto err_node_put;
>  
> -	ret = qmp_combo_typec_switch_register(qmp);
> +	ret = qmp_combo_typec_register(qmp);
>  	if (ret)
>  		goto err_node_put;
>  
> 
> -- 
> 2.34.1
> 

-- 
With best wishes
Dmitry