[PATCH v5 1/2] dt-bindings: phy: Add i.MX8Q HSIO SerDes PHY binding
Richard Zhu
hongxing.zhu at nxp.com
Sun May 12 18:22:03 PDT 2024
Add i.MX8QM and i.MX8QXP HSIO SerDes PHY binding.
Introduce one HSIO configuration 'fsl,hsio-cfg', which need be set at
initialization according to board design.
Signed-off-by: Richard Zhu <hongxing.zhu at nxp.com>
---
.../bindings/phy/fsl,imx8qm-hsio.yaml | 152 ++++++++++++++++++
include/dt-bindings/phy/phy-imx8-pcie.h | 29 ++++
2 files changed, 181 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/fsl,imx8qm-hsio.yaml
diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8qm-hsio.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8qm-hsio.yaml
new file mode 100644
index 000000000000..de0276f05122
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/fsl,imx8qm-hsio.yaml
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/fsl,imx8qm-hsio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8QM SoC series High Speed IO(HSIO) SERDES PHY
+
+maintainers:
+ - Richard Zhu <hongxing.zhu at nxp.com>
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx8qm-hsio
+ - fsl,imx8qxp-hsio
+ reg:
+ items:
+ - description: Base address and length of the PHY block
+ - description: HSIO control and status registers(CSR) of the PHY
+ - description: HSIO CSR of the controller bound to the PHY
+ - description: HSIO CSR for MISC
+
+ reg-names:
+ items:
+ - const: reg
+ - const: phy
+ - const: ctrl
+ - const: misc
+
+ "#phy-cells":
+ const: 3
+ description:
+ The first defines lane index.
+ The second defines the type of the PHY refer to the include phy.h.
+ The third defines the controller index, indicated which controller
+ is bound to the lane.
+
+ clocks:
+ minItems: 5
+ maxItems: 14
+
+ clock-names:
+ minItems: 5
+ maxItems: 14
+
+ fsl,hsio-cfg:
+ description:
+ Specifies the use case of the HSIO module in the hardware design.
+ Because the HSIO module can be configure into three different use
+ cases.
+ Refer to macro HSIO_CFG* of include/dt-bindings/phy/phy-imx8-pcie.h.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 3
+
+ fsl,refclk-pad-mode:
+ description:
+ Specifies the mode of the refclk pad used. INPUT(PHY refclock is
+ provided externally via the refclk pad) or OUTPUT(PHY refclock is
+ derived from SoC internal source and provided on the refclk pad).
+ This property not exsit means unused(PHY refclock is derived from
+ SoC internal source).
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [ input, output ]
+
+ power-domains:
+ minItems: 1
+ maxItems: 2
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - "#phy-cells"
+ - clocks
+ - clock-names
+ - fsl,hsio-cfg
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx8qxp-hsio
+ then:
+ properties:
+ clock-names:
+ items:
+ - const: pclk0
+ - const: apb_pclk0
+ - const: phy0_crr
+ - const: ctl0_crr
+ - const: misc_crr
+ power-domains:
+ maxItems: 1
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx8qm-hsio
+ then:
+ properties:
+ clock-names:
+ items:
+ - const: pclk0
+ - const: pclk1
+ - const: apb_pclk0
+ - const: apb_pclk1
+ - const: pclk2
+ - const: epcs_tx
+ - const: epcs_rx
+ - const: apb_pclk2
+ - const: phy0_crr
+ - const: phy1_crr
+ - const: ctl0_crr
+ - const: ctl1_crr
+ - const: ctl2_crr
+ - const: misc_crr
+ power-domains:
+ minItems: 2
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx8-clock.h>
+ #include <dt-bindings/clock/imx8-lpcg.h>
+ #include <dt-bindings/firmware/imx/rsrc.h>
+ #include <dt-bindings/phy/phy-imx8-pcie.h>
+
+ phy at 5f1a0000 {
+ compatible = "fsl,imx8qxp-hsio";
+ reg = <0x5f1a0000 0x10000>,
+ <0x5f120000 0x10000>,
+ <0x5f140000 0x10000>,
+ <0x5f160000 0x10000>;
+ reg-names = "reg", "phy", "ctrl", "misc";
+ clocks = <&phyx1_lpcg IMX_LPCG_CLK_0>,
+ <&phyx1_lpcg IMX_LPCG_CLK_4>,
+ <&phyx1_crr1_lpcg IMX_LPCG_CLK_4>,
+ <&pcieb_crr3_lpcg IMX_LPCG_CLK_4>,
+ <&misc_crr5_lpcg IMX_LPCG_CLK_4>;
+ clock-names = "pclk0", "apb_pclk0", "phy0_crr", "ctl0_crr", "misc_crr";
+ power-domains = <&pd IMX_SC_R_SERDES_1>;
+ #phy-cells = <3>;
+ fsl,hsio-cfg = <IMX8Q_HSIO_CFG_PCIEB>;
+ fsl,refclk-pad-mode = "input";
+ };
+...
diff --git a/include/dt-bindings/phy/phy-imx8-pcie.h b/include/dt-bindings/phy/phy-imx8-pcie.h
index 8bbe2d6538d8..8f65a77fca09 100644
--- a/include/dt-bindings/phy/phy-imx8-pcie.h
+++ b/include/dt-bindings/phy/phy-imx8-pcie.h
@@ -11,4 +11,33 @@
#define IMX8_PCIE_REFCLK_PAD_INPUT 1
#define IMX8_PCIE_REFCLK_PAD_OUTPUT 2
+/*
+ * Regarding the design of i.MX8QM HSIO subsystem, HSIO module can be
+ * confiured as following three use cases.
+ *
+ * Define different configurations refer to the use cases, since it is
+ * mandatory required in the initialization.
+ *
+ * On i.MX8QXP, HSIO module only has PCIEB and one lane PHY.
+ * Define "IMX8Q_HSIO_CFG_PCIEB" for i.MX8QXP platforms.
+ *
+ * +----------------------------------------------------+----------+
+ * | | i.MX8QM | i.MX8QXP |
+ * |-------------------------------|--------------------|----------|
+ * | | Lane0| Lane1| Lane2| Lane0 |
+ * |-------------------------------|------|------|------|----------|
+ * | IMX8Q_HSIO_CFG_PCIEAX2SATA | PCIEA| PCIEA| SATA | |
+ * |-------------------------------|------|------|------|----------|
+ * | IMX8Q_HSIO_CFG_PCIEAX2PCIEB | PCIEA| PCIEA| PCIEB| |
+ * |-------------------------------|------|------|------|----------|
+ * | IMX8Q_HSIO_CFG_PCIEAPCIEBSATA | PCIEA| PCIEB| SATA | |
+ * |-------------------------------|------|------|------|----------|
+ * | IMX8Q_HSIO_CFG_PCIEB | - | - | - | PCIEB |
+ * +----------------------------------------------------+----------+
+ */
+#define IMX8Q_HSIO_CFG_PCIEAX2SATA 0x1
+#define IMX8Q_HSIO_CFG_PCIEAX2PCIEB 0x2
+#define IMX8Q_HSIO_CFG_PCIEAPCIEBSATA (IMX8Q_HSIO_CFG_PCIEAX2SATA | IMX8Q_HSIO_CFG_PCIEAX2PCIEB)
+#define IMX8Q_HSIO_CFG_PCIEB IMX8Q_HSIO_CFG_PCIEAX2PCIEB
+
#endif /* _DT_BINDINGS_IMX8_PCIE_H */
--
2.37.1
More information about the linux-phy
mailing list