[PATCH v4 2/3] dt-bindings: phy: Add i.MX8Q HSIO SerDes PHY binding

[Rob Herring (Arm)]

On Thu, 09 May 2024 13:56:20 +0800, Richard Zhu wrote:
> Add i.MX8QM and i.MX8QXP HSIO SerDes PHY binding.
> Introduce one HSIO configuration 'fsl,hsio-cfg', which need be set at
> initialization according to board design.
> 
> Signed-off-by: Richard Zhu <hongxing.zhu at nxp.com>
> ---
>  .../bindings/phy/fsl,imx8qm-hsio.yaml         | 142 ++++++++++++++++++
>  1 file changed, 142 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/fsl,imx8qm-hsio.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:
./Documentation/devicetree/bindings/phy/fsl,imx8qm-hsio.yaml:54:13: [error] string value is redundantly quoted with any quotes (quoted-strings)
./Documentation/devicetree/bindings/phy/fsl,imx8qm-hsio.yaml:54:22: [error] string value is redundantly quoted with any quotes (quoted-strings)

dtschema/dtc warnings/errors:

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/1715234181-672-3-git-send-email-hongxing.zhu@nxp.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.