Lockdep broken on x1e80100

[Neil Armstrong]

On 25/06/2024 09:37, Abel Vesa wrote:
> On 24-06-25 08:47:29, Johan Hovold wrote:
>> On Wed, Feb 08, 2023 at 09:01:53PM +0200, Abel Vesa wrote:
>>> This patchset adds support for the eUSB2 repeater found in pmic PM8550B,
>>> used along with SM8550. Since there is no dedicated generic framework
>>> for eUSB2 repeaters, the most appropriate subsystem to model it is the
>>> generic phy. This patchset also adds support for such repeater to the
>>> eUSB2 PHY found in SM8550. Basically, the eUSB2 PHY will have its own
>>> "phy" which is actually a repeater.
>>
>> The decision to model the repeater as a PHY unfortunately breaks lockdep
>> as you now have functions like phy_init() calling phy_init() for a
>> second PHY (the repeater, see splat below).
>>
> 
> This was reported by Bjorn off-list a couple of months ago. I did check
> it then and the order is perfectly fine. The solution here should be to
> use mutex_lock_nested in the PHY framework. This would allow supporting
> chain-linked PHYs. The possibility of moving out the repeater out of PHY
> was also discussed. Unfortunately, I didn't have the bandwidth to
> circle back and properly investigate and fix it.

Well technically it's a PHY, and moving out from PHY will basically duplicate
the PHY core code... so we should rather make sure we can call phy code from
phy callbacks safely.

Neil

> 
>> As long as the locks are always taken in the same order there should be
>> no risk for a deadlock, but can you please verify that and add the
>> missing lockdep annotation so that lockdep can be used on platforms like
>> x1e80100 (e.g. to prevent further locking issues from being introduced)?
>>
>> Johan
>>
>>
>> [    8.613248] ============================================
>> [    8.669073] WARNING: possible recursive locking detected
>> [    8.669074] 6.10.0-rc5 #122 Not tainted
>> [    8.669075] --------------------------------------------
>> [    8.669075] kworker/u50:0/77 is trying to acquire lock:
>> [    8.669076] ffff5cae8733ecf8 (&phy->mutex){+.+.}-{3:3}, at: phy_init+0x4c/0x12c
>> [    8.669087]
>>                 but task is already holding lock:
>> [    8.669088] ffff5cae8a056cf8 (&phy->mutex){+.+.}-{3:3}, at: phy_init+0x4c/0x12c
>> [    8.669092]
>>                 other info that might help us debug this:
>> [    8.669092]  Possible unsafe locking scenario:
>>
>> [    8.669093]        CPU0
>> [    8.669093]        ----
>> [    8.669094]   lock(&phy->mutex);
>> [    8.669095]   lock(&phy->mutex);
>> [    8.669097]
>>                  *** DEADLOCK ***
>>
>> [    8.669097]  May be due to missing lock nesting notation
>>
>> [    8.669097] 4 locks held by kworker/u50:0/77:
>> [    8.669099]  #0: ffff5cae80010948 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x1a4/0x638
>> [    8.669108]  #1: ffff800080333de0 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work+0x1cc/0x638
>> [    8.669112]  #2: ffff5cae854038f8 (&dev->mutex){....}-{3:3}, at: __device_attach+0x38/0x1d4
>> [    8.669117]  #3: ffff5cae8a056cf8 (&phy->mutex){+.+.}-{3:3}, at: phy_init+0x4c/0x12c
>> [    8.669121]
>>                 stack backtrace:
>> [    8.669122] CPU: 9 PID: 77 Comm: kworker/u50:0 Not tainted 6.10.0-rc5 #122
>> [    8.669124] Hardware name: Qualcomm CRD, BIOS 6.0.231221.BOOT.MXF.2.4-00348.1-HAMOA-1 12/21/2023
>> [    8.669125] Workqueue: events_unbound deferred_probe_work_func
>> [    8.669128] Call trace:
>> [    8.669129]  dump_backtrace+0x9c/0x11c
>> [    8.870384]  show_stack+0x18/0x24
>> [    8.870386]  dump_stack_lvl+0x90/0xd0
>> [    8.870391]  dump_stack+0x18/0x24
>> [    8.870393]  print_deadlock_bug+0x25c/0x348
>> [    8.870396]  __lock_acquire+0x10a4/0x2064
>> [    8.870399]  lock_acquire.part.0+0xc8/0x20c
>> [    8.870401]  lock_acquire+0x68/0x84
>> [    8.870403]  __mutex_lock+0x98/0x428
>> [    8.870407]  mutex_lock_nested+0x24/0x30
>> [    8.870410]  phy_init+0x4c/0x12c
>> [    8.870412]  qcom_snps_eusb2_hsphy_init+0x54/0x420 [phy_qcom_snps_eusb2]
>> [    8.870416]  phy_init+0xe0/0x12c
>> [    8.870418]  dwc3_core_init+0x484/0x1214
>> [    8.870421]  dwc3_probe+0xe54/0x171c
>> [    8.870424]  platform_probe+0x68/0xd8
>> [    8.870426]  really_probe+0xc0/0x388
>> [    8.870427]  __driver_probe_device+0x7c/0x160
>> [    8.870429]  driver_probe_device+0x40/0x114
>> [    8.870430]  __device_attach_driver+0xbc/0x158
>> [    8.870432]  bus_for_each_drv+0x84/0xe0
>> [    8.870433]  __device_attach+0xa8/0x1d4
>> [    8.870435]  device_initial_probe+0x14/0x20
>> [    8.870436]  bus_probe_device+0xb0/0xb4
>> [    8.870437]  deferred_probe_work_func+0xa0/0xf4
>> [    8.870439]  process_one_work+0x224/0x638
>> [    8.870441]  worker_thread+0x268/0x3a8
>> [    8.870442]  kthread+0x124/0x128
>> [    8.870443]  ret_from_fork+0x10/0x20