[PATCH v3 3/6] phy: exynos5-usbdrd: convert core clocks to clk_bulk

[Peter Griffin]

Hi André,

On Mon, 17 Jun 2024 at 17:45, André Draszik <andre.draszik at linaro.org> wrote:
>
> Using the clk_bulk APIs, the clock handling for the core clocks becomes
> much simpler. No need to check any flags whether or not certain clocks
> exist or not. Further, we can drop the various handles to the
> individual clocks in the driver data and instead simply treat them all
> as one thing.
>
> So far, this driver assumes that all platforms have a clock "ref". It
> also assumes that the clocks "phy_pipe", "phy_utmi", and "itp" exist if
> the platform data "has_common_clk_gate" is set to true. It then goes
> and individually tries to acquire and enable and disable all the
> individual clocks one by one. Rather than relying on these implicit
> clocks and open-coding the clock handling, we can just explicitly spell
> out the clock names in the different device data and use that
> information to populate clk_bulk_data, allowing us to use the clk_bulk
> APIs for managing the clocks.
>
> As a side-effect, this change highlighted the fact that
> exynos5_usbdrd_phy_power_on() forgot to check the result of the clock
> enable calls. Using the clk_bulk APIs, the compiler now warns when
> return values are not checked - therefore add the necessary check
> instead of silently ignoring failures and continuing as if all is OK
> when it isn't.
>
> For consistency, also change a related dev_err() to dev_err_probe() in
> exynos5_usbdrd_phy_clk_handle() to get consistent error message
> formatting.
>
> Finally, exynos5_usbdrd_phy_clk_handle() prints an error message in all
> cases as necessary (except for -ENOMEM). There is no need to print
> another message in its caller (the probe() function), and printing
> errors during OOM conditions is usually discouraged. Drop the
> duplicated message in exynos5_usbdrd_phy_probe().
>
> Signed-off-by: André Draszik <andre.draszik at linaro.org>
> ---

Reviewed-by:  Peter Griffin <peter.griffin at linaro.org>
and
Tested-by: Peter Griffin <peter.griffin at linaro.org>

Tested using my Pixel 6 pro device. USB comes up and it is possible to
use adb from the host computer to the phone.

regards,

Peter

[..]