[PATCH v4 0/6] Add USB VBUS regulator for RZ/G2L

[Biju Das]

Hi Vinod,

Thanks for the feedback.

> -----Original Message-----
> From: Vinod Koul <vkoul at kernel.org>
> Sent: Thursday, June 20, 2024 5:38 PM
> Subject: Re: [PATCH v4 0/6] Add USB VBUS regulator for RZ/G2L
> 
> On 16-06-24, 11:53, Biju Das wrote:
> > As per RZ/G2L HW manual, VBUS enable can be controlled by the VBOUT
> > bit of the VBUS Control Register(VBENCTL) register in the USBPHY
> > Control. But this IP is in the Reset block.
> >
> > Reset driver exposes this register as regmap and instantiate the USB
> > VBUS regulator device. Consumers(phy device) can use regulator APIs to
> > control VBUS as controlling is done in the atomic context.
> >
> > We need to have merge strategy which subsytem will apply this patches
> > as it involves multiple subsystems Reset, Regulator, PHY, DT and
> > Renesas SoC??
> 
> Why is there a dependency.. why cant they go thru respective trees?

In this series, only regulator driver changes has no dependency.

PHY driver (phy-rcar-gen3-usb2.c) has a dependency on new regulator consumer API regulator_hardware_enable(),
Without this it will lead to compilation error.

USB PHY ctrl driver(reset-rzg2l-usbphy-ctrl.c) instantiate and bind regulator driver(renesas-usb-vbus-regulator.c).

If regulator driver is not there means, USB PHY ctrl driver probe() fails,
that will break existing USB functionality.

Cheers,
Biju