[PATCH v6 4/7] dt-bindings: phy: armada-cp110-utmi: add optional swap-dx-lanes property

[Conor Dooley]

On Sun, Jun 02, 2024 at 05:49:39PM +0200, Josua Mayer wrote:
> Armada CP110 UTMI supports swapping D+ and D- signals.
> usb251xb.yaml already describes a suitable device-tree property for the
> same purpose but as child usb controller node.
> 
> Add optional swap-dx-lanes device-tree property to armada cp110 utmi phy
> with same semantics as usb251xb:
> The property lists all ports that swap D+ and D-, unlisted ports are
> considered correct.
> 
> Signed-off-by: Josua Mayer <josua at solid-run.com>
> ---
>  .../devicetree/bindings/phy/marvell,armada-cp110-utmi-phy.yaml      | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/phy/marvell,armada-cp110-utmi-phy.yaml b/Documentation/devicetree/bindings/phy/marvell,armada-cp110-utmi-phy.yaml
> index 9ce7b4c6d208..2ef02aac042a 100644
> --- a/Documentation/devicetree/bindings/phy/marvell,armada-cp110-utmi-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/marvell,armada-cp110-utmi-phy.yaml
> @@ -41,6 +41,12 @@ properties:
>        Phandle to the system controller node
>      $ref: /schemas/types.yaml#/definitions/phandle
>  
> +  swap-dx-lanes:

Missing a vendor prefix.
Otherwise, to me naive eye, seems okay.

> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    description: |

This | probably isn't needed though, there's not any format here that
seems worth preserving.

Thanks,
Conor.

> +      Specifies the ports which will swap the differential-pair (D+/D-),
> +      default is not-swapped.
> +
>  # Required child nodes:
>  
>  patternProperties:
> 
> -- 
> 2.35.3
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-phy/attachments/20240604/913b8582/attachment.sig>